Telemecanique Sensors XCSD Series Rotary Safety Limit Switch, 1 NO/2 NC, IP66, IP67, Plastic Housing, 240V ac, 1.5A

RS 제품 번호:: 198-560
제조사 부품 번호:: XCSD3919P20
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCSD Series Rotary Safety Limit Switch, 1 NO/2 NC, IP66, IP67, Plastic Housing, 240V ac, 1.5A

Subtotal (1 unit)*

₩162,960.00

제한된 재고

7 개 단위 배송 준비 완료
추가로 2026년 7월 30일 부터 30 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩162,960.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 198-560
제조사 부품 번호:: XCSD3919P20
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Actuator Type	Rotary
	Product Type	Safety Limit Switch
	Contact Configuration	1 NO/2 NC
	IP Rating	IP66, IP67
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	1.5A
	Terminal Type	Terminal
	Series	XCSD
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Standards/Approvals	CE, CSA, EN, IEC, RoHS, UL
	Length	122mm
	Width	34mm
	Depth	35mm
	Hazardous Area Certification	No
	Conduit Entry	M20 x 1.5
	Operating Force	0.25mN
	Mechanical Life	10000000Cycles

	모두 선택
	브랜드 Telemecanique Sensors
	Actuator Type Rotary
	Product Type Safety Limit Switch
	Contact Configuration 1 NO/2 NC
	IP Rating IP66, IP67
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 1.5A
	Terminal Type Terminal
	Series XCSD
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Standards/Approvals CE, CSA, EN, IEC, RoHS, UL
	Length 122mm
	Width 34mm
	Depth 35mm
	Hazardous Area Certification No
	Conduit Entry M20 x 1.5
	Operating Force 0.25mN
	Mechanical Life 10000000Cycles

Telemecanique Sensors XCSD Series Safety Limit Switch, IP66/IP67, 10000000 Cycles Mechanical Life - XCSD3919P20

This safety limit switch is a rotary-actuated device designed to detect position and interrupt circuits in industrial control systems. Housed in a plastic enclosure with ingress protection suitable for harsh environments, it serves as a Compact Interface between moving machinery and safety or control circuits. It supports both AC and DC switching and is intended for installation where precise mechanical signalling and low actuation effort are required.

Features and Benefits:

• Snap-action contacts deliver Rapid state change for clear signalling
• Contact arrangement provides one normally open and two normally closed contacts
• Low actuation force of 0.25mN reduces wear on mechanical linkages
• Rated for 250V DC and 240V AC switching to cover diverse loads
• Conduit entry M20x1.5 simplifies cable gland fitting and sealing
• Mechanical endurance of 10000000 cycles ensures long service intervals

Applications

• Suitable for door and guard position monitoring in automated cells
• Ideal for conveyor end-of-travel detection in material handling
• Used with pneumatic actuators for machine safety interlocks
• Can be used for position feedback on packaging equipment

What environmental protection does it provide for washdown or dusty areas?

The enclosure meets IP66 and IP67 classifications, providing dust-tight protection and temporary immersion resistance when correctly installed.

How is the device connected electrically in control panels?

It uses screw terminals configured for a single NO and two NC contacts, allowing direct wiring into control or safety circuits.

What temperature range can it operate within?

It functions between -25°C and 70°C, accommodating typical industrial ambient conditions.

Which standards cover its conformity and safety assessment?

It complies with CE, CSA, EN, IEC, RoHS and UL approvals relevant to industrial switching components.

What mounting footprint or size constraints should installers expect?

The switch is Compact with overall dimensions 34mm width, 35mm depth and 122mm length for tight panel or actuator mounting.