Omron D4n Series Lever Limit Switch, 1 NO/1 NC, IP67, Metal Housing, 240V, 10A

RS 제품 번호:: 215-5048
제조사 부품 번호:: D4NH-4ABC
제조업체:: Omron

Omron D4n Series Lever Limit Switch, 1 NO/1 NC, IP67, Metal Housing, 240V, 10A

Subtotal (1 unit)*

₩139,932.00

제조사가 재고 비축중

2026년 10월 06일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩139,932.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 215-5048
제조사 부품 번호:: D4NH-4ABC
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	Limit Switch
	Actuator Type	Lever
	Contact Configuration	1 NO/1 NC
	IP Rating	IP67
	Housing Material	Metal
	Contact Type	Snap Action
	Switching Current	10A
	Terminal Type	Screw
	Series	D4n
	Minimum Operating Temperature	-30°C
	Switching DC Voltage	250V
	Switching AC Voltage	240V
	Maximum Operating Temperature	+70°C
	Depth	30mm
	Width	50mm
	Length	72mm
	Standards/Approvals	UL, RoHS, CSA, CE, CCC
	Hazardous Area Certification	No
	Mounting Orientation	Multi Directional
	Mechanical Life	10000000Cycles
	Operating Force	6.4N
	Conduit Entry	M20

	모두 선택
	브랜드 Omron
	Product Type Limit Switch
	Actuator Type Lever
	Contact Configuration 1 NO/1 NC
	IP Rating IP67
	Housing Material Metal
	Contact Type Snap Action
	Switching Current 10A
	Terminal Type Screw
	Series D4n
	Minimum Operating Temperature -30°C
	Switching DC Voltage 250V
	Switching AC Voltage 240V
	Maximum Operating Temperature +70°C
	Depth 30mm
	Width 50mm
	Length 72mm
	Standards/Approvals UL, RoHS, CSA, CE, CCC
	Hazardous Area Certification No
	Mounting Orientation Multi Directional
	Mechanical Life 10000000Cycles
	Operating Force 6.4N
	Conduit Entry M20

Datasheet - D4NH-4ABC

Omron D4n Series Limit Switch, IP67, 10A Switching Current - D4NH-4ABC

This limit switch is a compact, metal-housed device for safety-door and position-sensing applications in industrial automation. It uses a lever actuator to detect mechanical movement and translates that motion into electrical switching for control circuits. The unit is intended for indoor machine safety and equipment guarding where a sealed, conduit-entry device is required.

Features & Benefits

• IP67 sealing provides protection against dust and temporary immersion
• 10A rated snap-action contacts handle common AC loads up to 240V
• Mechanical life of 10,000,000 cycles supports high-cycle operations
• Operating temperature range −30°C to +70°C allows wide thermal use
• 6.4N operating force ensures predictable actuation response
• Screw terminals enable secure wiring with standard crimp terminals

Applications

• Suitable for interlocking protective doors on production machinery
• Used for position sensing on conveyor end stops and Gates
• Ideal for safety monitoring of guards in packaging lines
• Can be used for limit detection in material-handling equipment

What contact arrangements are available for different control needs?

The device uses snap-action contacts with a 1NO/1NC configuration on this variant

other variants in the family offer multi-contact arrangements including dual NC and triple-NC options for varied circuit schemes.

How should conduit and connector choices be managed for installation?

This variant features an M20 conduit entry

installers should use recommended gland types and apply the specified tightening torque to preserve the enclosure seal.

What precautions apply to wiring and Terminal connections?

Use AWG20 to AWG18 (0.5 to 0.75 mm2) conductors with compatible crimp Terminals not exceeding 0.5mm thickness and tighten Terminal screws to the specified torque to prevent loose connections.

How does the switch behave under contact contamination?

The NC contact employs a direct-opening mechanism that forces contact separation to mitigate welding or sticking caused by metal deposition.

Are there any mounting or mechanical limits to observe?

The head can be rotated into four orientations and the ARM lever repositioned left, right or centre

avoid imposing more than 50 N on the shaft and secure with M4 fasteners to the recommended torque.