Omron D4n Series Roller Limit Switch, 1 NO/1 NC, IP67, Metal Housing, 240V

This limit switch is a Compact actuator device designed for industrial control and position sensing in automation, electrical and mechanical systems. It provides snap-action switching with both normally open and normally closed contacts, a roller-type actuator and conduit entry suited to panel or machine installation. The housing is manufactured from polymer and the unit is intended for indoor industrial environments where a sealed enclosure and frequent mechanical operation are required.

• IP67 enclosure for temporary immersion protection and dust exclusion
• Snap-action contact offers clear on/off switching at high speed
• 10A switching capacity supports 240V AC industrial loads
• Mechanical life of 15,000,000 cycles enables high-cycle applications
• Screw terminals accommodate AWG20 to 18 conductor sizes
• 6.4N operating force minimises actuation effort and wear

• Suitable for end-of-travel detection on conveyor systems
• Ideal for position feedback on machine tools and presses
• used with safety interlocks where sealed switching is required
• Can be used for motor control panels and relay logic inputs
• Suitable for test rigs requiring frequent actuation cycles

Use screw Terminals sized for 0.5 to 0.75mm² wires and ensure Terminal screws are tightened to 0.6 to 0.8 N·m to maintain electrical contact and the rated protection.

It meets impulse withstand voltages of 2.5 kV between same-polarity terminals and 4 kV between different polarities, providing resilience against transient overvoltages.

The device functions from −30 °C up to +70 °C when not subject to icing, allowing use across a wide range of industrial ambient conditions.

Do not use metal conduits or metal connectors

A direct-opening mechanism forcibly separates NC contacts to help prevent welded contact failure when contact deposits occur.