제조사부품번호

Telemecanique Sensors ZCMC Series Limit Switch, 2P

RS 제품 번호:: 195-1740
제조사 부품 번호:: ZCMC21L7
제조업체:: Telemecanique Sensors

Telemecanique Sensors ZCMC Series Limit Switch, 2P

Subtotal (1 unit)*

₩74,340.00

12 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩74,340.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 195-1740
제조사 부품 번호:: ZCMC21L7
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Product Type	Limit Switch
	Contact Configuration	2P
	Contact Type	Snap Action
	Terminal Type	Cable
	Series	ZCMC
	Standards/Approvals	RoHS
	Length	7m
	Hazardous Area Certification	No

	모두 선택
	브랜드 Telemecanique Sensors
	Product Type Limit Switch
	Contact Configuration 2P
	Contact Type Snap Action
	Terminal Type Cable
	Series ZCMC
	Standards/Approvals RoHS
	Length 7m
	Hazardous Area Certification No

Telemecanique Sensors ZCMC Series Limit Switch, 2P Contact Configuration, 7m Length - ZCMC21L7

This limit switch is a Compact electromechanical device designed to detect and change state when a physical actuator is engaged, intended for use in non-hazardous environments. It connects via an attached cable to control systems and provides a Rapid contact change suitable for position sensing and end-of-travel detection in industrial installations.

Features and Benefits:

• Two-pole contact arrangement for clear make-and-break signalling
• Snap-action contact type for Rapid switching response
• Cable termination simplifies wiring to remote control panels
• RoHS-compliant construction reduces restricted-substance concerns
• Seven metre cable length for flexible installation reach

Applications

• Suitable for position sensing on industrial machinery
• Used with conveyor end-of-travel detection systems
• Ideal for automated gate and door limit detection
• Can be used for actuator travel confirmation in assemblies

What environmental certification applies to this device?

It is not certified for hazardous-area use and is intended for standard industrial atmospheres.

How is the electrical connection provided to control equipment?

Electrical connection is MADE via an integral cable terminating at the unit for direct wiring.

What switching behaviour should be expected during operation?

The contacts operate with a snap-action mechanism that delivers an abrupt change of state when actuated.

How many separate circuits can be switched simultaneously?

The internal contact set provides two poles, enabling two circuits to be switched concurrently.