Honeywell NGC Series Roller Plunger Limit Switch, SPDT, IP67, Metal Housing, 240V ac, 6A

RS 제품 번호:: 125-2416
제조사 부품 번호:: NGCMB30AX01C
제조업체:: Honeywell

Honeywell NGC Series Roller Plunger Limit Switch, SPDT, IP67, Metal Housing, 240V ac, 6A

Subtotal (1 unit)*

₩131,527.50

재고있음

4 개 단위 배송 준비 완료
추가로 2026년 5월 07일 부터 20 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩131,527.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 125-2416
제조사 부품 번호:: NGCMB30AX01C
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Actuator Type	Roller Plunger
	Product Type	Limit Switch
	Contact Configuration	SPDT
	IP Rating	IP67
	Housing Material	Metal
	Contact Type	Snap Action
	Terminal Type	Cable
	Switching Current	6A
	Series	NGC
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	75°C
	Depth	71.1mm
	Standards/Approvals	RoHS
	Width	16.7mm
	Length	30mm
	Hazardous Area Certification	NO
	Mounting Orientation	Vertical
	Conduit Entry	M12 x 1 thread
	Operating Force	11N
	Mechanical Life	5000000Cycles

	모두 선택
	브랜드 Honeywell
	Actuator Type Roller Plunger
	Product Type Limit Switch
	Contact Configuration SPDT
	IP Rating IP67
	Housing Material Metal
	Contact Type Snap Action
	Terminal Type Cable
	Switching Current 6A
	Series NGC
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 75°C
	Depth 71.1mm
	Standards/Approvals RoHS
	Width 16.7mm
	Length 30mm
	Hazardous Area Certification NO
	Mounting Orientation Vertical
	Conduit Entry M12 x 1 thread
	Operating Force 11N
	Mechanical Life 5000000Cycles

Honeywell NGC Series Limit Switch, 11N Operating Force, IP67 - NGCMB30AX01C

This limit switch provides a Compact electromechanical means to detect position changes in industrial systems, converting mechanical movement into a snap‑action electrical signal for control and safety circuits. It is suited to installations requiring a robust sensor with a metal enclosure and a roller plunger actuator, and is supplied with a cable termination for straightforward wiring in automated and mechanical equipment.

Features and Benefits:

• SPDT contact delivers single‑pole changeover switching for control flexibility
• Snap‑action contacts enable fast, repeatable state transitions under load
• IP67 ingress protection allows use in wet or dusty environments
• Metal housing offers mechanical durability for industrial handling
• 11 N operating force ensures predictable actuation from driven mechanisms
• 5 million cycle mechanical life supports extended maintenance intervals

Applications

• Suitable for detecting end‑of‑travel on conveyor indexing systems
• Ideal for position confirmation on actuator‑driven valves
• Used with pick‑and‑place robotics for repeatable limit detection
• Can be used for machine guard interlocks in harsh shop‑floor environments

What electrical load can the switch handle on AC and DC supplies?

It is rated for switching currents up to 6A and can switch AC voltages up to 240V and DC voltages up to 250V under its specified contact rating.

How does the conduit entry facilitate installation in control panels?

The M12x1 threaded conduit entry provides a standardised gland Interface for secure cable routing and strain relief into the enclosure.

What temperature range is acceptable for reliable operation?

The device is specified to operate between −25 °C and 75 °C, allowing use across common industrial temperature conditions.

Which mounting orientation is recommended for correct actuation?

Vertical mounting is specified to ensure the actuator and roller plunger align with intended mechanical interfaces.

How is the unit terminated electrically for system integration?

It is supplied with cable termination, enabling direct connection to control wiring without separate Terminal blocks.