Honeywell NGC Series Roller Plunger Limit Switch, 2 NC/2 NO, IP67, Metal Housing, 400V ac, 10A

RS 제품 번호:: 894-3380
Distrelec 제품 번호:: 303-44-448
제조사 부품 번호:: NGCMB50AX32L
제조업체:: Honeywell

Honeywell NGC Series Roller Plunger Limit Switch, 2 NC/2 NO, IP67, Metal Housing, 400V ac, 10A

Subtotal (1 unit)*

₩248,605.50

추가로 2026년 5월 25일 부터 18 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩248,605.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 894-3380
Distrelec 제품 번호:: 303-44-448
제조사 부품 번호:: NGCMB50AX32L
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Product Type	Limit Switch
	Actuator Type	Roller Plunger
	Contact Configuration	2 NC/2 NO
	IP Rating	IP67
	Housing Material	Metal
	Contact Type	Positive Break
	Terminal Type	Cable
	Switching Current	10A
	Series	NGC
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	400V ac
	Maximum Operating Temperature	+75°C
	Length	30mm
	Standards/Approvals	CE, IEC, cUL, CCC, UL, RoHS
	Depth	71.1mm
	Width	16.7mm
	Hazardous Area Certification	No
	Mounting Orientation	Panel
	Operating Force	9.5N
	Mechanical Life	5000000Cycles

	모두 선택
	브랜드 Honeywell
	Product Type Limit Switch
	Actuator Type Roller Plunger
	Contact Configuration 2 NC/2 NO
	IP Rating IP67
	Housing Material Metal
	Contact Type Positive Break
	Terminal Type Cable
	Switching Current 10A
	Series NGC
	Minimum Operating Temperature -25°C
	Switching AC Voltage 400V ac
	Maximum Operating Temperature +75°C
	Length 30mm
	Standards/Approvals CE, IEC, cUL, CCC, UL, RoHS
	Depth 71.1mm
	Width 16.7mm
	Hazardous Area Certification No
	Mounting Orientation Panel
	Operating Force 9.5N
	Mechanical Life 5000000Cycles

COO (Country of Origin):: CN

Honeywell NGC Series Limit Switch, 9.5N Operating Force, IP67 - NGCMB50AX32L

This limit switch provides a mechanically actuated electrical cut-off for industrial control and safety applications, using a roller plunger actuator to detect linear motion and trigger circuits. It is designed for panel mounting and connects via an integrated cable termination, delivering reliable switching in automation and electrical systems where defined contact separation is required.

Features and Benefits:

• Positive-break contacts ensure clear circuit separation during operation
• Withstands switching at 400V AC for heavy control loads
• Rated for 10A switching current to handle moderate currents
• Operating force of 9.5N for consistent actuation response
• Mechanical endurance of 5 million cycles for long service intervals
• IP67 metal housing provides protection in harsh environments

Applications

• Suitable for conveyor end-of-travel sensing in manufacturing lines
• Used with motor starters for position-limited safety interlocks
• Ideal for assembly jigs requiring precise mechanical actuation feedback
• Can be used for door or guard position detection in machinery panels

What Terminal arrangement is provided for wiring?

A pre-attached cable termination simplifies connection to control wiring without additional Terminal blocks.

How does temperature influence suitability for plant environments?

The device operates within specified ambient temperature bounds and should be installed where temperatures remain between the stated minimum and maximum for predictable switching behaviour.

Are there approvals that assist acceptance in regulated installations?

It holds multiple conformity approvals from recognised standards bodies, facilitating use where standards-compliant components are specified.

What mounting orientation is recommended for reliable operation?

It is intended for panel mounting to ensure correct actuator alignment and repeatable actuation forces.