Telemecanique Sensors XCMH Series Plunger Limit Switch, 2 NC, IP66, IP67, Plastic Housing, 240V ac, 0.1A, 0.75 A

RS 제품 번호:: 194-121
제조사 부품 번호:: XCMH2910L1
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Plunger Limit Switch, 2 NC, IP66, IP67, Plastic Housing, 240V ac, 0.1A, 0.75 A

Subtotal (1 unit)*

₩100,820.00

제조사가 재고 비축중

2027년 1월 18일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩100,820.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 194-121
제조사 부품 번호:: XCMH2910L1
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Plunger
	IP Rating	IP66, IP67
	Contact Configuration	2 NC
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	0.1, 0.75A
	Series	XCMH
	Switching DC Voltage	300V dc
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Depth	60mm
	Length	16mm
	Standards/Approvals	IEC 60947-5-1 UL 508 CSA C22.2 No 14 IEC 60204-1
	Width	30mm
	Hazardous Area Certification	No
	Conduit Entry	M20
	Mechanical Life	5000000Cycles
	Operating Force	42.5N
	Mounting Orientation	Vertical

	모두 선택
	브랜드 Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Plunger
	IP Rating IP66, IP67
	Contact Configuration 2 NC
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 0.1, 0.75A
	Series XCMH
	Switching DC Voltage 300V dc
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Depth 60mm
	Length 16mm
	Standards/Approvals IEC 60947-5-1 UL 508 CSA C22.2 No 14 IEC 60204-1
	Width 30mm
	Hazardous Area Certification No
	Conduit Entry M20
	Mechanical Life 5000000Cycles
	Operating Force 42.5N
	Mounting Orientation Vertical

Datasheet - XCMH2910L1

COO (Country of Origin):: ID

Telemecanique Sensors XCMH Series Limit Switch, IP66/IP67 Ingress Protection, 240V AC Switching Voltage - XCMH2910L1

This limit switch is a compact industrial position sensor designed for vertical mounting to detect mechanical movement using a plunger actuator. It is intended for incorporation into machinery control circuits where a snap-action contact is required for reliable switching in manufacturing and automation environments. The unit is constructed with a plastic enclosure suited to demanding workplaces and offers a conduit entry for secure wiring.

Features and Benefits:

• Snap-action contacts provide rapid state change and low bounce
• Two normally closed contacts enable fail-safe circuit arrangements
• Rated for 300V DC and 240V AC switching for versatile load compatibility
• Operating force of 42.5N ensures positive actuation under load
• Mechanical life of 5,000,000 cycles supports long-term repetitive use
• IP66 and IP67 protection allows operation in wet and dusty conditions

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for guard-door interlocks on assembly equipment
• Used with hydraulic presses for position feedback
• Can be used for automated packaging line position sensing
• Appropriate for safety cut-outs on machine tools

What temperatures can it operate within safely

It functions from -25°C up to 70°C, covering typical indoor and many outdoor industrial climates.

How is the device wired into control systems

It provides two normally closed contacts with snap-action switching

electrical connection is made via an M20 conduit entry for protected cable routing.

What approvals support industrial installation

The design aligns with IEC 60947-5-1 and IEC 60204-1 standards and meets UL 508 and CSA C22.2 No 14 approvals for electrical equipment.

What mounting orientation is required for correct operation

It is intended for vertical mounting to ensure proper plunger actuation and repeatable switching behaviour.