Endress+Hauser FTL33 Series Vibration Level Switch Level Switch, Threaded Mount, Housing 316L Stainless Steel

모든 Level Sensors 열람하기

Subtotal (1 unit)*

₩631,520.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 8월 10일 부터 2 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩631,520.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-9328
Distrelec 제품 번호:
303-84-124
제조사 부품 번호:
FTL33-AA4N3ABW5J
제조업체:
Endress+Hauser
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Endress+Hauser

Product Type

Level Switch

Device Type

Vibration Level Switch

Mount Type

Threaded Mount

Housing Material

316L Stainless Steel

Cable Length

5m

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

70°C

Maximum DC Voltage

30V dc

Maximum AC Voltage

253V ac

Maximum Pressure

25bar

Standards/Approvals

CE mark

Series

FTL33

Hazardous Area Certification

No

COO (Country of Origin):
DE

Endress+Hauser FTL33 Series Level Switch, 70°C Maximum Operating Temperature, 25 Bar Maximum Pressure - FTL33-AA4N3ABW5J


This level switch is a vibration-based sensor designed to detect liquid or bulk-material presence within industrial installations. It operates across a wide ambient temperature range and connects via an attached cable for straightforward signal transmission. Built in corrosion-resistant metal, the device is intended for routine point-level detection in non-classified areas and integrates with threaded process connections.

Features and Benefits:


• Stainless steel 316L housing for corrosive environments
• Operates from -40 to 70°C for varied ambient conditions
• Withstands up to 10 bar static pressure for pressurised vessels
• Low current draw of 15 mA reduces power load
• Compatible with 253V AC and 30V DC supply systems
• Supplied with 5m cable for flexible mounting distance

Applications


• Suitable for pump protection to prevent dry running
• Ideal for high-side overfill indication on tanks
• Used with transfer lines where point-level control is required
• Can be used for sump-level monitoring in workshops
• Suitable for integration into basic control cabinets in plant rooms

What mounting method does it use and why is that useful?


It fits into a threaded process port, allowing secure installation and straightforward replacement without specialised adaptors.

Is the device appropriate for hazardous-area installations?


It is not certified for hazardous-area use and should only be deployed in non-classified locations.

What materials contact the process medium?


The wetted parts are manufactured from 316L stainless steel to provide chemical resistance and reduced corrosion risk.

How does the electrical interface accommodate different control systems?


The switch tolerates mains-level AC up to 253V and low-voltage DC up to 30V while operating on a low current consumption of 15 mA.

관련된 링크들