제조사부품번호

Endress+Hauser FTL31 Series Vibration Level Switch Level Switch, Threaded Mount, Housing Polybutylene Terephthalate

RS 제품 번호:: 256-6172
Distrelec 제품 번호:: 303-51-208
제조사 부품 번호:: FTL31-AA4U3BAWSJ
제조업체:: Endress+Hauser

Endress+Hauser FTL31 Series Vibration Level Switch Level Switch, Threaded Mount, Housing Polybutylene Terephthalate

Subtotal (1 unit)*

₩539,160.00

40 개 단위 배송 준비 완료
추가로 2026년 8월 14일 부터 25 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩539,160.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 256-6172
Distrelec 제품 번호:: 303-51-208
제조사 부품 번호:: FTL31-AA4U3BAWSJ
제조업체:: Endress+Hauser

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Endress+Hauser
	Product Type	Level Switch
	Device Type	Vibration Level Switch
	Mount Type	Threaded Mount
	Housing Material	Polybutylene Terephthalate
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	70°C
	Maximum Pressure	25bar
	Standards/Approvals	CE mark
	Hazardous Area Certification	No
	Series	FTL31

	모두 선택
	브랜드 Endress+Hauser
	Product Type Level Switch
	Device Type Vibration Level Switch
	Mount Type Threaded Mount
	Housing Material Polybutylene Terephthalate
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 70°C
	Maximum Pressure 25bar
	Standards/Approvals CE mark
	Hazardous Area Certification No
	Series FTL31

COO (Country of Origin):: DE

Endress+Hauser FTL31 Series Level Switch, 70°C Maximum Operating Temperature, 25 Bar Maximum Pressure - FTL31-AA4U3BAWSJ

This level switch is a vibration-based sensor designed to detect material levels in industrial process systems. It operates across a wide ambient temperature range and connects to remote monitoring via an extended cable, making it suitable for installations where continuous mechanical contact is undesirable. The device is intended for non-hazardous zones and incorporates a polymer housing for chemical compatibility.

Features and Benefits:

• Operates reliably from -40°C to 70°C to cover extreme conditions
• Withstands process pressures up to 10 bar to 25 bar for diverse systems
• Uses just 15 mA current consumption to reduce power draw on loops
• Supplied with 1000m cable to enable distant mounting and control-room runs
• Threaded mount design for straightforward installation into standard ports
• Polymer housing material resists corrosion and simplifies maintenance

Applications

• Suitable for monitoring bulk solids in silos and hoppers
• Ideal for liquid level detection in tanks with moderate pressure
• Used with remote control rooms where long cable runs are required
• Can be used for point-level switching in pump protection schemes
• Suitable for non-explosive industrial process vessels

What type of enclosure does it have for corrosive environments?

The unit is enclosed in a polybutylene terephthalate casing that provides chemical resistance and reduces the need for metallic corrosion protection.

How is the sensor mounted into process equipment?

It uses a threaded mounting interface allowing direct insertion into standard tapped ports for secure mechanical attachment.

Is the device suitable for classified hazardous areas?

No, it is not certificated for hazardous-area use and should only be installed in non-hazardous locations.

What electrical loading should be planned for in system design?

The sensor draws a low operating current of 15 mA, which should be accounted for in loop power budgets and input circuits.

Does the product meet any conformity marking for European markets?

It carries a CE marking indicating conformity with relevant UK and European directives for marketed electrical apparatus.