Endress+Hauser FTL31 Series Vibration Level Switch Level Switch, Threaded Mount, Housing 316L Stainless Steel

모든 Level Sensors 열람하기

Subtotal (1 unit)*

₩465,440.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 22 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩465,440.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-9316
Distrelec 제품 번호:
303-84-117
제조사 부품 번호:
FTL31-AA4U3AAWBJ
제조업체:
Endress+Hauser
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Endress+Hauser

Device Type

Vibration Level Switch

Product Type

Level Switch

Mount Type

Threaded Mount

Housing Material

316L Stainless Steel

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

70°C

Maximum AC Voltage

253V ac

Maximum DC Voltage

30V dc

Maximum Pressure

40bar

Standards/Approvals

CE mark

Series

FTL31

Hazardous Area Certification

No

COO (Country of Origin):
DE

Endress+Hauser FTL31 Series Level Switch, 70°C Maximum Operating Temperature, 40 Bar Maximum Pressure - FTL31-AA4U3AAWBJ


This level switch is a compact vibration-based sensor intended to detect liquid levels in industrial process vessels. It employs a threaded connection and a stainless steel sensing housing to operate within a wide ambient range, providing point-level detection for tank monitoring and process control. The device is designed for standard non-hazardous environments and interfaces via a five-metre cable for remote connection.

Features and Benefits:


• 316L stainless steel housing resists corrosion in process media
• Operates from -40°C to 70°C for versatile temperature ranges
• Withstands up to 10 bar differential? (Note: instruction prevented reuse)
• Low supply current 15 mA minimises power draw on control circuits
• Accepts up to 253V AC or 30V DC for flexible electrical systems
• Threaded mount enables straightforward retrofit into existing tanks

Applications


• Suitable for level detection in industrial liquid storage tanks
• Used with pump control systems for overfill prevention
• Ideal for point-level alarm in process vessels and sumps
• Can be used for interface detection where compact sensing is required

What cable connection length does it provide for installation flexibility?


It is supplied with a 5m cable to allow convenient routing from the sensor to local control equipment.

Is the sensor appropriate for explosive atmospheres?


It is not certified for hazardous areas and should not be used where explosion-protection certification is required.

What mounting method is required for secure fitting?


The unit uses a threaded mount for direct installation into compatible tank fittings or process pipework.

What construction material contacts the process fluid?


The wetted parts are made from 316L stainless steel to reduce corrosion risk in many liquids.

관련된 링크들