Carlo Gavazzi CLP Series Level Controller -, DIN Rail 2 Analogue Input 24V-Rated Relay
- RS 제품 번호:
- 858-2686
- Distrelec 제품 번호:
- 304-02-363
- 제조사 부품 번호:
- CLP2EA1C230
- 제조업체:
- Carlo Gavazzi
Subtotal (1 unit)*
₩433,134.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 + | ₩433,134.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 858-2686
- Distrelec 제품 번호:
- 304-02-363
- 제조사 부품 번호:
- CLP2EA1C230
- 제조업체:
- Carlo Gavazzi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Carlo Gavazzi | |
| Product Type | Level Controller | |
| Number of Inputs | 2 | |
| Probe Voltage | 5V | |
| Mount Type | DIN Rail | |
| Response Time | 5s | |
| Minimum Operating Temperature | -20°C | |
| Terminal Type | Screw | |
| Maximum Operating Temperature | 50°C | |
| IP Rating | IP20 | |
| Maximum Supply Voltage | 24V | |
| Standards/Approvals | UL, CSA | |
| Hazardous Area Certification | No | |
| Current Rating | 8A | |
| Output Type | Relay | |
| Number of Outputs | 5 | |
| Input Type | Analogue | |
| Sensitivity | 500kΩ | |
| Series | CLP | |
| 모두 선택 | ||
|---|---|---|
브랜드 Carlo Gavazzi | ||
Product Type Level Controller | ||
Number of Inputs 2 | ||
Probe Voltage 5V | ||
Mount Type DIN Rail | ||
Response Time 5s | ||
Minimum Operating Temperature -20°C | ||
Terminal Type Screw | ||
Maximum Operating Temperature 50°C | ||
IP Rating IP20 | ||
Maximum Supply Voltage 24V | ||
Standards/Approvals UL, CSA | ||
Hazardous Area Certification No | ||
Current Rating 8A | ||
Output Type Relay | ||
Number of Outputs 5 | ||
Input Type Analogue | ||
Sensitivity 500kΩ | ||
Series CLP | ||
제외
- COO (Country of Origin):
- LT
Carlo Gavazzi Level Controller
The Carlo Gavazzi conductive microprocessor-based level controller is designed for liquids with a wide sensitivity range (like sewage water, chemicals, saltwater etc.). This controller has a separate output for alarm indication in case of a tank running dry or if an overflow condition occurs. Liquid level relays are used to monitor the levels of conductive liquids and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid level relays are straightforward to install and safe to use. It has a supply voltage of 230VAC.
Features and Benefits
Conductive level controller
Adjustment of sensitivity
Low-voltage AC electrodes
Output 2x8A/250 VAC DPDT relay
LED indication for output ON and power ON
Sensitivity adjustment from 250ohm to 500Kohm
Easy installation on DIN rails or with an 11-pin circular plug
11-pin circular plug mount
Relay output is 0.5Hz
Applications
Liquid level relays (conductive level sensors) are used in a wide variety of applications, including wastewater management and the monitoring and management of corrosive liquid media.
Designed specifically to provide monitoring and control of liquid levels, Protection of pumps against dry running, ability to detect liquid leaks in a system, control of media mixing ratios and control of liquid levels.
Certifications
CE certified
CSA certified
관련된 링크들
- Carlo Gavazzi CLP Series Level Controller -, DIN Rail 2 Analogue Input 24V-Rated Relay
- Carlo Gavazzi CLD1EA1CM24 Series Level Controller -, DIN Rail 1 Analogue Input 24V-Rated Relay
- Carlo Gavazzi CLD2EB1BU24 Series Level Controller -, DIN Rail 2 Analogue Input 24V-Rated Relay
- Carlo Gavazzi CL Series Level Relay -, DIN Rail 2 230V-Rated Relay
- Carlo Gavazzi CLP Series Capacitance Level Sensor, Chassis, Housing Polycarbonate, ABS
- Carlo Gavazzi VP Series level sensor Level Sensor, Threaded, ATEX-Rated, Housing Plastic
- Carlo Gavazzi VP Series level sensor Level Sensor, Threaded, Ex-Approved-Rated, Housing Plastic
- Vega VEGAMET 841 Series Level Controller -, Wall 1 Voltage Input 230V-Rated Analogue