STMicroelectronics Lighting Controller, 4.5/42 V 200 mA 24-Pin QFN
- RS 제품 번호:
- 275-1304P
- 제조사 부품 번호:
- ALED7709ATR
- 제조업체:
- STMicroelectronics
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 50 units (supplied on a continuous strip)*
₩243,750.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 50 - 98 | ₩4,875.00 |
| 100 - 248 | ₩4,202.25 |
| 250 - 998 | ₩3,987.75 |
| 1000 + | ₩3,919.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 275-1304P
- 제조사 부품 번호:
- ALED7709ATR
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Output Current | 200mA | |
| Product Type | Lighting Controller | |
| Input Voltage Type | DC | |
| Dimming Operation | Analogue | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Number of Pins | 24 | |
| Maximum Output Voltage | 42V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Length | 5.1mm | |
| Height | 0.9mm | |
| Series | ALED7709ATR | |
| Standards/Approvals | RoHS | |
| Minimum Output Voltage | 4.5V | |
| Automotive Standard | AEC-Q100 | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Output Current 200mA | ||
Product Type Lighting Controller | ||
Input Voltage Type DC | ||
Dimming Operation Analogue | ||
Mount Type Surface | ||
Package Type QFN | ||
Number of Pins 24 | ||
Maximum Output Voltage 42V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Length 5.1mm | ||
Height 0.9mm | ||
Series ALED7709ATR | ||
Standards/Approvals RoHS | ||
Minimum Output Voltage 4.5V | ||
Automotive Standard AEC-Q100 | ||
- COO (Country of Origin):
- TH
The STMicroelectronics automotive grade LED drivers combining a boost or SEPIC controller and four low-side constant current sinkers, designed to drive strings of high brightness LEDs. The switching converter section provides the supply rail for the LED strings whose value is constantly optimized for maximum efficiency. The boost or SEPIC controller supports the external synchronization and spread spectrum. It can work simultaneously or exclusively in standalone mode (SAM), controlled only by PWMI signal and in bus driven mode (BDM) through an I2C serial interface.
AEC-Q100 Grade1 qualified
Supports battery cranking events down to 4 V supply