RS PRO Cranked Turning Tool Bit Carbide Brazed Tip, 100mm
- RS 제품 번호:
- 615-0808
- 제조업체:
- RS PRO
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩29,280.00
재고있음
- 16 개 단위 배송 준비 완료
- 추가로 2026년 11월 23일 부터 40 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩29,280.00 |
| 5 + | ₩24,100.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 615-0808
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Product Type | Lathe Part | |
| Sub Type | Cranked Turning Tool Bit | |
| Overall Length | 100mm | |
| Rake Angle | 5° | |
| Number of Pieces | 1 | |
| Material | Carbide Brazed Tip | |
| Finish | Bright | |
| Cutting Direction | Right | |
| Standards/Approvals | DIN 4978, Similar to BHMA 162-177, ISO 3 | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Product Type Lathe Part | ||
Sub Type Cranked Turning Tool Bit | ||
Overall Length 100mm | ||
Rake Angle 5° | ||
Number of Pieces 1 | ||
Material Carbide Brazed Tip | ||
Finish Bright | ||
Cutting Direction Right | ||
Standards/Approvals DIN 4978, Similar to BHMA 162-177, ISO 3 | ||
제외
- COO (Country of Origin):
- CN
Carbide Brazed Tip Turning Tools
A selection of carbide tipped brazed turning tools manufactured in 2 standard grades
P30 - Blue - A general purpose grade for small workshops where a variety of steels are machined. Suitable for roughing of steel and castings using moderate feeds and moderate to low cutting speeds
K20 - Red - For finishing and light roughing of cast iron and other short chip materials using fine to moderate feeds and moderate to high cutting speeds
Also suitable for milling operations
All dimensions are approximate
Note
Parting off tools are ISO 7
Cranked Knife tools are ISO 3 except 615-0915 which is ISO 6
Cranked Knife tools are ISO 3 except 615-0915 which is ISO 6
관련된 링크들
- RS PRO Cranked Turning Tool Bit Carbide Brazed Tip, 100mm P30
- RS PRO Cranked Turning Tool Bit Carbide Brazed Tip, 140mm P30
- RS PRO Parting Off Turning Tool Carbide Brazed Tip, 125mm P30
- RS PRO Single Ended Carbide Brazed Tip, 125mm
- RS PRO Single Ended Carbide Brazed Tip, 110mm P30
- RS PRO Single Ended Carbide Brazed Tip, 140mm P30
- Pramet Parting Off Turning Tool Aluminium
- Pramet Parting Off Turning Tool Aluminium Coarse