Eaton 2-Pole Surface Mount Isolator Switch -, IP65, 20A, 5.5 kW

모든 Isolator Switches 열람하기

Subtotal (1 Box of 1 unit)*

₩50,115.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 8 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Box(es)
Per Box
1 +₩50,115.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
629-2097
제조사 부품 번호:
70023734 T0-1-102/I1H/K-CI-K1/2(RS629-2097)
제조업체:
Eaton
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Eaton

Number of Poles

2

Product Type

Isolator Switch

Mount Type

Surface Mount

IP Rating

IP65

Electrical Phase

1

Handle Colour

Black

Auxiliary Contacts Available

No

Switching Current

20A

Series

T0-1

Terminal Type

Screw

Minimum Operating Temperature

-25°C

Switching AC Voltage

400V ac

Switching Power

5.5kW

Padlock Compatibility

No

Maximum Operating Temperature

50°C

Length

80mm

Standards/Approvals

UL, IEC, EN, CSA

Hazardous Area Certification

ATEX

Depth

75mm

Width

120mm

Eaton Non-Fused Switch Disconnectors - T0 Series Rotary Switches


The T0 series of switch disconnectors from Eaton are compact and robust. Rotary Cam Switches can be used for many switching and control applications, for example as ON-OFF, main, main/control, or instrument switches. The device consists of a hand actuator, the switch unit and the mounting accessories. This range of isolator switches is also suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.

With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 20 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.

• Performs local isolation, manual override & safety switch functions

• T0 Series fit a standard front plate of 45 x 45 mm

• For spare rotary thumb stick (black) see stock no. 176-9759

• For Shaft Extension Kit see stock no. 323-173

What is the difference between a fused switch disconnector and a non-fused switch disconnector?


Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller

관련된 링크들