Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 125A, 45 kW

모든 Isolator Switches 열람하기

Subtotal (1 unit)*

₩396,630.00

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량
한팩당
1 +₩396,630.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
621-7838
제조사 부품 번호:
280897 P5-125/E
제조업체:
Eaton
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Eaton

Number of Poles

3

Product Type

Isolator Switch

Mount Type

Panel Mount

IP Rating

IP65

Electrical Phase

3

Handle Colour

Black

Terminal Type

Screw

Switching Current

125A

Series

P5-125

Auxiliary Contacts Available

Yes

Switching AC Voltage

400V ac

Minimum Operating Temperature

-25°C

Switching Power

45kW

Padlock Compatibility

No

Maximum Operating Temperature

50°C

Depth

91mm

Length

112mm

Standards/Approvals

EN, CSA, ATEX, UL, IEC

Hazardous Area Certification

ATEX

Width

88mm

COO (Country of Origin):
DE

Eaton Panel Mount Isolator Switch


Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring, manually disconnecting the power supply to isolated parts of the circuit. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits


• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions are when used as a main switch, maintenance switch or manual override switch

• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Rated uninterrupted current of up to 32 A

• Lockable in the 0/OFF position, with up to three padlocks

• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

• Common accessories: 262-3784, 219-1445, 219-1439

What is the difference between a fused switch disconnector and a non-fused switch disconnector?


Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller

관련된 링크들