Schneider Electric 3-Pole Panel Mount Isolator Switch -, IP65, 29A, 18.5 kW

RS 제품 번호:: 609-4281
제조사 부품 번호:: VCD2
제조업체:: Schneider Electric

Schneider Electric 3-Pole Panel Mount Isolator Switch -, IP65, 29A, 18.5 kW

Subtotal (1 unit)*

₩358,098.00

10 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩358,098.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 609-4281
제조사 부품 번호:: VCD2
제조업체:: Schneider Electric

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Schneider Electric
	Number of Poles	3
	Product Type	Isolator Switch
	Mount Type	Panel Mount
	IP Rating	IP65
	Electrical Phase	3
	Handle Colour	Red
	Switching Current	29A
	Terminal Type	Screw Clamp
	Auxiliary Contacts Available	No
	Series	TeSyS Vario
	Switching AC Voltage	690V ac
	Padlock Compatibility	Yes
	Minimum Operating Temperature	-20°C
	Switching Power	18.5kW
	Maximum Operating Temperature	50°C
	Width	60mm
	Hazardous Area Certification	No
	Standards/Approvals	UKCA, CSA, GL, IEC, REACH, RoHS, UL, CCC
	Depth	74mm
	Length	60mm

	모두 선택
	브랜드 Schneider Electric
	Number of Poles 3
	Product Type Isolator Switch
	Mount Type Panel Mount
	IP Rating IP65
	Electrical Phase 3
	Handle Colour Red
	Switching Current 29A
	Terminal Type Screw Clamp
	Auxiliary Contacts Available No
	Series TeSyS Vario
	Switching AC Voltage 690V ac
	Padlock Compatibility Yes
	Minimum Operating Temperature -20°C
	Switching Power 18.5kW
	Maximum Operating Temperature 50°C
	Width 60mm
	Hazardous Area Certification No
	Standards/Approvals UKCA, CSA, GL, IEC, REACH, RoHS, UL, CCC
	Depth 74mm
	Length 60mm

COO (Country of Origin):: CZ

Schneider Electric VARIO Series Isolator Switch, 29A Switching Current, IP65 - VCD2

This isolator switch provides a secure means of isolating three-phase AC supplies for control and emergency-stop functions on panel doors. Designed for industrial environments, it offers padlockable rotary control with a red handle and a yellow front plate, enabling clear on/off marking and simple door-mounted operation.

Features & Benefits

• 29A switching current for typical control circuits offering dependable interruption
• 690V rated operational voltage supporting high-voltage distribution systems
• 18.5kW switching power at 500V delivering suitability for motor control loads
• IP65 enclosure ensuring protection against dust and low-pressure water jets
• Screw clamp terminals accepting up to 10mm² conductors for secure connections
• Padlockable handle enabling up to three padlocks for locked-out safety

Applications

• Suitable for door-mounted emergency stop on industrial control panels
• Ideal for isolating 3-phase motor starters in manufacturing plants
• Used for safety isolation in conveyor and automation systems
• Can be used for maintenance isolation in electrical distribution cabinets

What mounting preparation is required for installation?

A 22.5mm diameter hole is needed for the rotary handle, and the device is designed to mount directly on the door with a 60x60mm base footprint.

How does it perform under short-circuit conditions?

The device can withstand a rated conditional short-circuit current of 10kA at 400V when paired with the specified 50A fuse type.

What mechanical and electrical endurance can be expected?

Mechanical life is 100,000 cycles while electrical endurance reaches 100,000 cycles in AC-21 duty and 30,000 cycles in DC applications.

What environmental conditions will it tolerate during operation?

It operates between -20°C and 50°C, resists vibration and shocks per IEC standards, and passes a 960°C glow-wire fire-resistance test.

Note

The figures quoted for rated operational power within the price table are with respect to a voltage of 230/240V, with figures within brackets ( ) being those with respect to a voltage of 690V.
The higher current rating refers to use in free air, the lower current rating represents use in an enclosure.

Approvals

UL, CSA, GL