Eaton 6-Pole Panel Mount Isolator Switch -, IP65, 260A, 13 kW

모든 Isolator Switches 열람하기

Subtotal (1 unit)*

₩174,603.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 5월 25일 부터 5 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩174,603.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
257-9609
Distrelec 제품 번호:
304-23-014
제조사 부품 번호:
076072 T3-3-8342/V/SVB
제조업체:
Eaton
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Eaton

Number of Poles

6

Product Type

Isolator Switch

Mount Type

Panel Mount

IP Rating

IP65

Electrical Phase

3

Handle Colour

Red

Switching Current

260A

Auxiliary Contacts Available

Yes

Terminal Type

Screw

Series

T3-3

Minimum Operating Temperature

-25°C

Switching Power

13kW

Padlock Compatibility

No

Switching DC Voltage

60V dc

Switching AC Voltage

230V ac

Maximum Operating Temperature

50°C

Width

65mm

Standards/Approvals

CSA, IEC, UL

Hazardous Area Certification

NO

Length

65mm

Depth

105mm

COO (Country of Origin):
GB

Eaton Rear of Panel Mounted Switch Disconnectors


The P and T range of non-fused switch disconnectors from Eaton provides safe switching, isolating and control. Robust and reliable, these high-performance devices are used primarily in industrial and engineering applications. With the added IP65 ingress protection rating they are ideal for use in harsh environments or applications that require extra protection.

Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able to carry out the necessary works without any electrical risks.

Features and Benefits


• Compact and durable

• Clear position indication

• Padlockable in the OFF position with up to 3 x 8 mm padlocks

• Rear mounting, easily and quickly fitted on to DIN rail or a base plate

• P series switches can be mounted in electrical cabinets or enclosures up to 400mm deep with an additional extension shaft

Applications


The Eaton P and T series of manually operated switch disconnectors are used in a wide range of industrial applications and installations. Some of the most common are

• Machine control panels

• Isolation of circuit breakers

• Transformers and transmission lines

• Switchgear panels

• Distribution panels

• Consumer units

Suitable Accessories include:

Extended shaft kits

• Part number 323-173 is an extended shaft kit for 20, 25 and 32A disconnect switches. They are 25mm long and up to 4 can be connected if required.

• Part number 323-189 is an extended shaft kit for 63,85 and 100A disconnect switches. They are 25mm long and up to 4 can be connected if required.

Neutral blocks

• Part number 333-495 for a 3 pole 25A add-on neutral block

• Part number 333-502 for a 3 pole 32A add-on neutral block

• Part number 333-518 for a 3 pole 63A add-on neutral block

Contact Blocks

• Part number 333-546 for a NO/NC 10A auxiliary contact block for the rear of the panel switch disconnectors. Maximum 2 blocks per switch

What is the difference between a fused switch disconnector and a non-fused switch disconnector?


Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller

관련된 링크들