Eaton 3-Pole Surface Mount Isolator Switch -, IP65, 640A, 30 kW
- RS 제품 번호:
- 103-8465
- 제조사 부품 번호:
- 207348 P3-63/I4/SVB/HI11
- 제조업체:
- Eaton
Subtotal (1 unit)*
₩261,046.50
재고있음
- 27 개 단위 배송 준비 완료
- 추가로 2026년 6월 02일 부터 15 개 단위 배송
- 추가로 2026년 7월 07일 부터 9 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩261,046.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 103-8465
- 제조사 부품 번호:
- 207348 P3-63/I4/SVB/HI11
- 제조업체:
- Eaton
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Eaton | |
| Number of Poles | 3 | |
| Product Type | Isolator Switch | |
| Mount Type | Surface Mount | |
| IP Rating | IP65 | |
| Electrical Phase | 1, 3 | |
| Handle Colour | Red | |
| Switching Current | 640A | |
| Series | P3-63 | |
| Auxiliary Contacts Available | Yes | |
| Terminal Type | Screw | |
| Minimum Operating Temperature | -25°C | |
| Switching Power | 30kW | |
| Padlock Compatibility | No | |
| Switching DC Voltage | 60V dc | |
| Switching AC Voltage | 230V ac | |
| Maximum Operating Temperature | 50°C | |
| Depth | 240mm | |
| Length | 160mm | |
| Hazardous Area Certification | NO | |
| Standards/Approvals | CSA, IEC, UL | |
| Width | 124mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Eaton | ||
Number of Poles 3 | ||
Product Type Isolator Switch | ||
Mount Type Surface Mount | ||
IP Rating IP65 | ||
Electrical Phase 1, 3 | ||
Handle Colour Red | ||
Switching Current 640A | ||
Series P3-63 | ||
Auxiliary Contacts Available Yes | ||
Terminal Type Screw | ||
Minimum Operating Temperature -25°C | ||
Switching Power 30kW | ||
Padlock Compatibility No | ||
Switching DC Voltage 60V dc | ||
Switching AC Voltage 230V ac | ||
Maximum Operating Temperature 50°C | ||
Depth 240mm | ||
Length 160mm | ||
Hazardous Area Certification NO | ||
Standards/Approvals CSA, IEC, UL | ||
Width 124mm | ||
- COO (Country of Origin):
- GB
Eaton Isolator Switch, Lockable, 3NO Normal State Configuration - 207348 P3-63/I4/SVB/HI11
To safely shut down a circuit in a jiffy, reach for this high-power isolator switch from Eaton. You can use it to disconnect sections of a circuit carrying currents up to 63A, voltages up to 690V AC and power up to 37kW. This lets you carry out necessary maintenance or identify faults safely. As a 3-pole, single-throw switch, it's suitable for switching either single-phase systems or the 3-phase systems commonly used in industrial settings. This makes it a good bet for factory floors and workshops.
• Red handle makes it easy to spot in an emergency
• Can be padlocked so no one can turn the power back on until you're ready
• Operating temperature range of -25°C to +50°C indicates it's suitable for use in harsh industrial environments
• IP65 rating means it's dust-tight and stands up to low-pressure water sprays
• Screw terminals help you quickly make secure electrical connections
What's a 3-phase system?
3-phase power uses a 3-wire AC power circuit that has each phase signal set 120 electrical degrees apart. This delivers power more efficiently and consistently than a single-phase system and is commonly used in demanding industrial settings.
Note
Eaton formerly known as Moeller
관련된 링크들
- Eaton 3-Pole Surface Isolator Switch -, IP65, 640A, 5.5 kW
- Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 640A, 30 kW
- Eaton 3-Pole Flush Isolator Switch -, IP65, 640A, 30 kW
- Eaton 3-Pole Surface Non-Fused Isolator Switch -, IP65, 63A, 30 kW
- Eaton 3-Pole Surface Isolator Switch -, IP65, 640A, 4.5 W
- Eaton 3-Pole Surface Mount Isolator Switch -, IP65, 640A, 4.5 W
- Eaton 3-Pole Surface Isolator Switch -, IP65
- Eaton 3-Pole Surface Isolator Switch -, IP65, 63A, 30 kW