제조사부품번호

Broadcom 1-Channel Miniature Isolation Amplifier, 8-Pin 5.5 V SSOP

RS 제품 번호:: 693-5965P
제조사 부품 번호:: ACPL-C784-000E
제조업체:: Broadcom

대량 구매 할인 기용 가능

Subtotal 20 units (supplied in a tube)*

₩178,224.00

마지막 RS 재고

최종적인 423 개 unit(s)이 배송 준비 됨

수량	한팩당
20 - 39	₩8,911.20
40 +	₩8,760.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 693-5965P
제조사 부품 번호:: ACPL-C784-000E
제조업체:: Broadcom

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Broadcom
	Product Type	Miniature Isolation Amplifier
	Minimum Supply Voltage	5V
	Maximum Supply Voltage	5.5V
	Number of Channels	1
	Mount Type	Surface
	Package Type	SSOP
	Pin Count	8
	Minimum Operating Temperature	-40°C
	Isolation Type	Miniature Isolation Amplifiers
	CMRR - Common Mode Rejection Ratio	76dB
	Vos - Input Offset Voltage	0.3 mV
	Isolation Voltage	5000Vrms
	Maximum Operating Temperature	85°C
	Series	ACPL-C784
	Width	6.81 mm
	Standards/Approvals	IEC/EN/DIN EN 60747-5-5, UL 1577, CSA
	Height	3.18mm
	Length	5.85mm
	Automotive Standard	No

	모두 선택
	브랜드 Broadcom
	Product Type Miniature Isolation Amplifier
	Minimum Supply Voltage 5V
	Maximum Supply Voltage 5.5V
	Number of Channels 1
	Mount Type Surface
	Package Type SSOP
	Pin Count 8
	Minimum Operating Temperature -40°C
	Isolation Type Miniature Isolation Amplifiers
	CMRR - Common Mode Rejection Ratio 76dB
	Vos - Input Offset Voltage 0.3 mV
	Isolation Voltage 5000Vrms
	Maximum Operating Temperature 85°C
	Series ACPL-C784
	Width 6.81 mm
	Standards/Approvals IEC/EN/DIN EN 60747-5-5, UL 1577, CSA
	Height 3.18mm
	Length 5.85mm
	Automotive Standard No

Isolating Amplifiers, Avago Technologies

The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.

Various types available including:

precision isolation amplifiers

miniature isolation amplifiers

precision optically isolated voltage sensors

isolated linear sensing ICs

isolation amplifiers with short circuit and overload detection

automotive isolation amplifiers

Broadcom 1-Channel Miniature Isolation Amplifier, 8-Pin 5.5 V SSOP

Isolating Amplifiers, Avago Technologies

관련된 링크들