Microchip 8-Channel I/O Expander SSOP 20
- RS 제품 번호:
- 209-7661P
- 제조사 부품 번호:
- MCP23008T-E/SS
- 제조업체:
- Microchip
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 400 units (supplied on a reel)*
₩852,768.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 400 - 790 | ₩2,131.92 |
| 800 + | ₩2,101.84 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 209-7661P
- 제조사 부품 번호:
- MCP23008T-E/SS
- 제조업체:
- Microchip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Microchip | |
| Product Type | I/O Expander | |
| Number of I/O Channels | 8 | |
| Package Type | SSOP | |
| Clock Frequency | 1.7MHz | |
| Mount Type | Surface | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 1.8V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 20 | |
| Maximum Operating Temperature | 125°C | |
| Length | 7.5mm | |
| Width | 5.6 mm | |
| Standards/Approvals | No | |
| Series | MCP23008 | |
| Height | 1.85mm | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Microchip | ||
Product Type I/O Expander | ||
Number of I/O Channels 8 | ||
Package Type SSOP | ||
Clock Frequency 1.7MHz | ||
Mount Type Surface | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 1.8V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 20 | ||
Maximum Operating Temperature 125°C | ||
Length 7.5mm | ||
Width 5.6 mm | ||
Standards/Approvals No | ||
Series MCP23008 | ||
Height 1.85mm | ||
Automotive Standard No | ||
The Microchip MCP23008T-E/SS device provides 8-bit, general purpose, parallel I/O expansion for I2C bus or SPI applications. The two devices differ in the number of hardware address pins and the serial interface such as MCP23008 – I2C interface; three address pins and MCP23S08 – SPI interface; two address pins. The MCP23008T-E/SS consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits. The data for each input or output is kept in the corresponding Input or Output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master.
High-Speed I2C Interface
High-Speed SPI Interface
Polarity Inversion Register to Configure the Polarity of the Input Port Data
External Reset Input