Lapp ÖLFLEX HEAT Series Red 0.5 mm² Hook Up Wire, 20 AWG, 19/0.25 mm, 100m, Silicone Insulation, 48104

대량 구매 할인 기용 가능

Subtotal (1 reel of 100 metres)*

₩59,671.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2025년 12월 29일 부터 24 개 단위 배송
  • 추가로 2026년 2월 17일 부터 30 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
릴당
릴당
미터당*
1 - 24₩59,671.20₩595.96
25 +₩56,700.80₩567.76

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
724-4487
Distrelec 제품 번호:
301-58-385
제조사 부품 번호:
48104
제조업체:
Lapp
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Lapp

Cross Sectional Area

0.5 mm²

Sheath Colour

Red

Cable Shape

Single Core

American Wire Gauge

20 AWG

Core Strands

19/0.25 mm

Length

100m

Insulation Material

Silicone

Voltage Rating

300 V

Outer Diameter

2.1mm

Maximum Operating Temperature

+180°C

Minimum Operating Temperature

-50°C

CPR Certification

Eca

Conductor Material

Copper

Standards Met

EAC

Cable Type

High Temperature

Series

ÖLFLEX HEAT

Shield Type

Unshielded

Resistant To

Chemicals, Oils

Number of Strands

1

Size of Strands

0.25 mm

Olflex Heat 180 SiF


From Lapp, the OLFLEX HEAT is a single core cable with excellent temperature resistance. It features a silicone based insulation that makes it ideal for use in high temperature environments where conventional core insulation will brittle.

The cable has a flexible fine-wire conductor, and is halogen free, ensuring it is suitable for a wide range of applications. It also has resistance to oils, fats and chemical substances.

Features and Benefits

• Temperature Resistance
• Cold Resistance
• Resistance to some oils and chemical substances
• Halogen-free according to IEC 60754-1
• Corrosiveness of combustion gases according to IEC 60754-2
• Flame-retardant according IEC 60332-1-2
• Operating Temperature -50 °C to +180 °C (Adequate Ventilation Required)
• Minimum bending radius 6 x cable diameter for fixed applications

Applications

The Lapp OLFLEX HEAT 180 SiF cable is highly versatile, but its temperature resistance makes it particularly suited to;

• HVAC Systems
• Thermal and Heating Elements
• Furnace Construction
• Generator and Transformer Manufacturing
• Lighting Technology

Which wire types are a better choice, stranded or solid?

Both stranded and solid wire have the same resistance properties but stranded wire guarantee an extra flexibility, resistance to bending and are generally easier to install than solid cables.

Silicone rubber single core cable
Recommended for use in high ambient temperatures under sufficient ventilation and low mechanical stress
Largely resistant against oil, alcohol, acids, caustic solutions, salt solutions and salt water
Nominal voltage 300/500V
Temperature range -50 up to +180°C
Minimum bending radius 6 x cable diameter for fixed applications
Flame retardant to IEC 60332-1-2
Halogen free according to IEC 60754-1

Note

These are supplied coiled and shrink wrapped NOT on a reel.

LAPP Hook Up Wire, 2000V Test Voltage, 500V Voltage Rating - ÖLFLEX HEAT 180 SiF Series - 48104


If you want a connection that can take the heat, this hook up wire from LAPP is a safe bet. You can count on it to perform in demanding conditions thanks to its extended operating temperature range of -50°C to +180°C. It can even withstand up to +200°C for short periods to suit installation in thermal systems such as saunas and furnaces. The conductive copper cable zips signals across the circuit in a flash for near-instant responses.

Features & Benefits


• Thin 20AWG wire size allows quick routing through space-restricted areas
• Red sheath is easy to spot in busy cable arrangements
• Halogen-free properties mean it won't release toxins if heated, enhancing workplace safety

Applications


• IT infrastructure
• Manufacturing industry
• Motors and transformers

Is this hook up wire resistant to corrosion?


Yes. The cable's jacket is resistant to chemicals, oils and fats, preventing the internal wires from corroding in challenging environments.

관련된 링크들