Alpha Wire Hookup Wire TEFLON Series Red Hook Up Wire, 28 AWG, 7, 305 m, Polytetrafluoroethylene, 5852 RD001

Subtotal (1 reel of 305 metres)*

₩480,441.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 6월 15일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
릴당
릴당
미터당*
1 +₩480,441.00₩1,575.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
277-3710
Distrelec 제품 번호:
301-17-182
제조사 부품 번호:
5852 RD001
제조업체:
Alpha Wire
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Alpha Wire

Product Type

Hook Up Wire

Jacket Colour

Red

American Wire Gauge

28AWG

Core Strands

7

Cable Length

305m

Voltage

600V

Outside Diameter

0.89mm

Maximum Operating Temperature

200°C

Conductor Material

Silver Plated Copper

Jacket Material

Polytetrafluoroethylene

Standards/Approvals

EU RoHS II 2011/65/EU, EU 2015/863/EU, EC 1907/2006

Minimum Operating Temperature

-60°C

Cable Type

Single Core

Fire Behaviour

Flame Retardant

Series

Hookup Wire TEFLON

제외

Belden Hookup Wire TEFLON Series Hook Up Wire, 305m Cable Length, Red Jacket - 5852 RD001


This hook-up wire is a PTFE‑insulated conductor designed for electrical interconnection where temperature endurance and chemical resistance are required. It serves as a single‑core insulated lead for control, signal and power circuits in demanding environments, offering a Compact form for routed harnesses and panel wiring.

Features & Benefits


• Silver‑plated copper conductor minimises contact resistance and corrosion
• 7‑strand construction improves flexibility for repeated motion
• 0.08mm² cross section supports fine‑pitch wiring in confined spaces
• Rated 600V for use on common control and power circuits
• Continuous operating range −60°C to 200°C for extreme temperature exposure
• Flame‑retardant insulation reduces risk of fire propagation

**Applications**


• Suitable for harnesses in automotive and industrial equipment
• Ideal for internal wiring of control panels and instruments
• Used with high‑temperature sensors and heaters
• Can be used for routing signal leads in robotics and automation
• Suitable for retrofit and repair of heat‑exposed electrical assemblies

What mechanical handling limits should be observed?


Maximum pull tension is 1.37 lb and minimum bend radius is 10x cable diameter to avoid conductor strain.

How is the insulation constructed and what thickness applies?


The core is covered with a PTFE jacket having a nominal 0.010 in wall to provide dielectric separation and chemical resistance.

Are multiple colour options available for identification?


Yes, a variety of colours are produced including red, white, black, green, blue, yellow, brown, orange, grey, violet and several bi‑colour combinations to facilitate circuit identification.

How is electrical loss characterised for engineering use?


Conductor DCR is approximately 60 Ω/1000 ft at 20°C and inductance is about 0.07 μH/ft for impedance planning.

What regulatory material restrictions apply to the product?


Materials comply with EU RoHS directives and REACH substance limits as declared by the manufacturer.

관련된 링크들