Alpha Wire, 7, Polytetrafluoroethylene, 5852 GR001

RS 제품 번호:: 277-3709
Distrelec 제품 번호:: 301-17-180
제조사 부품 번호:: 5852 GR001
제조업체:: Alpha Wire

Alpha Wire, 7, Polytetrafluoroethylene, 5852 GR001

Subtotal (1 reel of 305 metres)*

₩513,014.40

일시적 품절

2026년 5월 11일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

릴당	릴당	미터당*
1 +	₩513,014.40	₩1,682.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 277-3709
Distrelec 제품 번호:: 301-17-180
제조사 부품 번호:: 5852 GR001
제조업체:: Alpha Wire

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Alpha Wire
	Core Strands	7
	Jacket Material	Polytetrafluoroethylene

	모두 선택
	브랜드 Alpha Wire
	Core Strands 7
	Jacket Material Polytetrafluoroethylene

Datasheet - 5852 GR001

Belden Hookup Wire TEFLON Series Hook Up Wire, 305m Cable Length, 0.08mm² Cross Sectional Area - 5852 GR001

This hook-up wire is a Teflon-insulated single-core conductor designed for electrical interconnection in demanding industrial environments. It delivers reliable signal and power transmission where elevated temperature endurance and chemical-resistant insulation are required.

Features & Benefits

• Silver-plated copper conductor minimises contact resistance and corrosion
• 7-strand construction improves flexibility for tight routing
• 0.08mm² cross section supports Compact circuitry connections
• Rated to 600V for use in medium-voltage wiring tasks
• Flame-retardant PTFE jacket enhances safety in installed systems
• Operational from -60°C to 200°C for high-temperature applications

Applications

• Suitable for harnesses in industrial automation cabinets
• Ideal for wiring in temperature-variable test rigs
• Used for internal connections on control panels and drives
• Can be used for signal wiring in instrumentation assemblies

How is the conductor configured to aid installation in confined spaces?

The conductor consists of seven fine strands which increase pliability, making the cable easier to bend and route within tight looms.

What environmental regulations relate to the material composition?

Materials comply with REACH and EU RoHS directives and meet the referenced restrictions on certain hazardous substances.

What mechanical handling limits should be observed during assembly?

Maximum pull tension is 1.37 lb and a minimum bend radius of ten times the cable diameter should be maintained to avoid damage.

How is the product supplied for production use?

Available on spools with common put-ups including 100m and continuous 305m lengths, with particular colour and length combinations sometimes available by special order.

What electrical characteristic is relevant for design calculations?

Conductor DC resistance is approximately 60 Ω per 1000 ft at 20°C and nominal inductance is 0.07 μH/ft.