제조사부품번호

Transcend M.2 256 MB Internal SSD

RS 제품 번호:: 683-222
제조사 부품 번호:: TS256GMTS570T-VS1
제조업체:: Transcend

Subtotal (1 unit)*

₩674,602.50

1 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩674,602.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 683-222
제조사 부품 번호:: TS256GMTS570T-VS1
제조업체:: Transcend

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Transcend
	Memory Size	256MB
	Sub Type	SSD
	Product Type	SSD
	Internal/External	Internal
	Form Factor	M.2
	Industrial Grade	Yes
	NAND Type	3D
	Interface Type	SATA III 6 Gb/S
	Maximum Operating Temperature	75°C
	Minimum Operating Temperature	-20°C
	Height	3.85mm
	Standards/Approvals	UKCA
	Length	42mm
	Width	22mm

	모두 선택
	브랜드 Transcend
	Memory Size 256MB
	Sub Type SSD
	Product Type SSD
	Internal/External Internal
	Form Factor M.2
	Industrial Grade Yes
	NAND Type 3D
	Interface Type SATA III 6 Gb/S
	Maximum Operating Temperature 75°C
	Minimum Operating Temperature -20°C
	Height 3.85mm
	Standards/Approvals UKCA
	Length 42mm
	Width 22mm

Datasheet - TS256GMTS570T-VS1

COO (Country of Origin):: TW

Transcend SSD, 256MB Memory size, M.2 Form Factor - TS256GMTS570T-VS1

This SSD is a Compact internal storage device designed for integration into industrial hardware where dependable solid-state memory is required. It connects via an M.2 Interface using the SATA III 6Gb/s protocol and is intended for applications that operate across a wide temperature range in demanding settings.

Features and Benefits:

• 3D NAND improves data density and endurance for prolonged use
• 256MB cache accelerates read/write responsiveness under load
• Industrial-grade design supports harsh operating environments
• Maximum operating temperature 75°C enables high-heat deployment
• Minimum operating temperature -20°C permits cold-start operation

Applications

• Suitable for embedded controllers in automation systems
• Ideal for data logging in electrical test equipment
• Used with industrial PCs in manufacturing line control
• Can be used for firmware storage in mechanical monitoring units

What physical form factor is required for installation?

It is compatible with M.2 sockets sized for 2242 modules and mounts directly onto the host board.

Which approval marking indicates regional conformity?

It carries the UKCA marking for conformity with applicable UK requirements.

How slim is the drive for space-constrained designs?

The device is a low-profile module with a height of 3.85mm suited to tight internal envelopes.

What Interface speed should I expect during integration?

Integration uses the SATA III Interface at up to 6Gb/s signalling for full protocol throughput.