Transcend M.2 512 GB Internal SSD

N
모든 Hard Drives 열람하기

Subtotal (1 unit)*

₩1,342,165.50

Add to Basket
수량 선택 또는 입력
공급 부족
  • 추가로 2026년 6월 01일 부터 2 개 단위 배송
당사의 현재 재고는 제한중이며, 제조사측에서는 공급 부족을 예상하고 있습니다.
수량
한팩당
1 +₩1,342,165.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
682-760
제조사 부품 번호:
TS512GMTE712A-VS1
제조업체:
Transcend
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Transcend

Memory Size

512GB

Sub Type

SSD

Product Type

SSD

Internal/External

Internal

Form Factor

M.2

Industrial Grade

Yes

NAND Type

3D

Encryption Level

256 Bit AES Encryption

Interface Type

NVMe PCIe Gen 4 x4

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

75°C

Width

22mm

Height

3.58mm

Length

80mm

Standards/Approvals

UKCA

COO (Country of Origin):
TW

Transcend SSD, 512GB Capacity, NVMe PCIe Gen 4 x4 Interface - TS512GMTE712A-VS1


This SSD is an internal high-performance storage device designed for demanding industrial and workstation environments. It connects via an NVMe PCIe Gen4 x4 Interface to deliver Rapid data transfer and low-latency access. Built for use in automation, electronics and mechanical systems, it supports operation across a wide temperature range and includes hardware-level data protection.

Features and Benefits:


• NVMe PCIe Gen4 x4 Interface enabling Faster transfer rates and reduced latency
• 256-bit AES encryption protecting stored data with hardware-based security
• 3D NAND technology providing dense, Durable flash memory
• Industrial-grade construction allowing reliable operation in harsh conditions
• Maximum operating temperature 75°C permitting higher thermal tolerance
• Internal M.2 form factor supporting Compact system integration

Applications


• Suitable for workstation data logging in industrial control systems
• Ideal for embedded automation platforms requiring secure storage
• Used for archival and retrieval in electronics test rigs
• Can be used for onboard storage in mechanical monitoring units

What physical form factor will fit into Compact boards?


It uses an M.2 form factor with an 80mm length and 22mm width, compatible with M.2 2280 slots that accept low-profile drives.

How does it perform in elevated-temperature installations?


The drive is specified to operate up to 75°C, allowing deployment in enclosures or cabinets where higher thermal conditions occur.

Is the device intended for internal or external mounting?


It is designed as an internal storage solution for installation inside workstations and industrial equipment.

What flash memory structure is used and why does it matter?


The device employs 3D NAND, which increases storage density and endurance compared with Planar NAND, beneficial for sustained write workloads.

Does the drive comply with UK regulatory marking requirements?


It carries the UKCA approval, indicating conformity with applicable United Kingdom regulations.

관련된 링크들