DiodesZetex Hall Effect Sensor 4 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28V dc, 3.8 V
- RS 제품 번호:
- 246-7398
- 제조사 부품 번호:
- AH3764Q-W-7
- 제조업체:
- DiodesZetex
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 10 units)*
₩12,285.00
재고있음
- 2,910 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 - 40 | ₩1,228.50 | ₩12,285.00 |
| 50 - 90 | ₩1,199.25 | ₩11,992.50 |
| 100 - 240 | ₩1,170.00 | ₩11,700.00 |
| 250 - 990 | ₩1,142.70 | ₩11,427.00 |
| 1000 + | ₩1,115.40 | ₩11,154.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 246-7398
- 제조사 부품 번호:
- AH3764Q-W-7
- 제조업체:
- DiodesZetex
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | DiodesZetex | |
| 모두 선택 | ||
|---|---|---|
브랜드 DiodesZetex | ||
The DiodesZetex makes a high-voltage, high-sensitivity Hall-effect latch IC designed for brushless DC-motor commutation, speed measurement, angular or linear encoders and position sensors in automotive applications. To support a wide range of demanding applications, the design is optimized to operate over the supply range of 3.0V to 28V. For robustness and protection, the device has a reverse blocking diode with a Zener clamp on the supply. The output has an over current limit and a Zener clamp. It has operating temperature range of -40°C to +150°C.
Operating voltage range of 3.0 V to 28 V Bipolar latch operation were south pole is on and north pole is off High sensitivity Bop and Brp of +25G and -25G typical Single open-drain output with overcurrent limit Package type is SC59
관련된 링크들
- DiodesZetex Hall Effect Sensor 4 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3.8 V
- DiodesZetex Hall Effect Sensor 4 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28V dc, 3.8 V
- DiodesZetex Hall Effect Sensor 4 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3 V
- DiodesZetex Hall Effect Sensor 4 mA 55 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3 V
- DiodesZetex Hall Effect Sensor 5.8 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3 V
- DiodesZetex Hall Effect Sensor 4 mA 60 mA Omnipolar Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3 V
- DiodesZetex Hall Effect Sensor 4 mA Omnipolar Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3 V dc
- Infineon Hall Effect Sensor 1.6 mA 25 mA Bipolar Hall Latch Solder Pin Open Drain Latching, 107 °C, -40 °C, 32 V, 3 V