DiodesZetex Hall Effect Sensor 4 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3 V
- RS 제품 번호:
- 246-7401
- 제조사 부품 번호:
- AH3781-P-A
- 제조업체:
- DiodesZetex
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 25 units)*
₩19,082.00
단종되는 중
- 최종적인 3,900 개 unit(s)이 배송 준비 됨
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 25 - 25 | ₩763.28 | ₩19,082.00 |
| 50 - 75 | ₩744.48 | ₩18,612.00 |
| 100 - 475 | ₩727.56 | ₩18,179.60 |
| 500 + | ₩708.76 | ₩17,728.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 246-7401
- 제조사 부품 번호:
- AH3781-P-A
- 제조업체:
- DiodesZetex
참조 문서
제정법과 컴플라이언스
제품 세부 사항
The DiodesZetex makes high-voltage, high-sensitivity Hall-effect latch IC designed for brushless DC-motor commutation, speed measurement, angular or linear encoders and position sensors in automotive applications. To support a wide range of demanding applications, the design is optimized to operate over the supply range of 3.0V to 28V. For robustness and protection, the device has a reverse blocking diode with a Zener clamp on the supply. The output has an over current limit and a Zener clamp. It has operating temperature range of -40°C to +150°C.
Operating voltage range of 3.0 V to 28 V Bipolar latch operation were south pole is on and north pole is off High sensitivity Bop and Brp of +25G and -25G typical single open-drain output with overcurrent limit Package type is SIP-3
관련된 링크들
- DiodesZetex Hall Effect Sensor 4 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V, 3 V
- DiodesZetex Hall Effect Sensor 4 mA 60 mA Omnipolar Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V, 3 V
- DiodesZetex Hall Effect Sensor 4 mA 55 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V, 3 V
- DiodesZetex Hall Effect Sensor 4 mA Omnipolar Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V, 3 V
- DiodesZetex Hall Effect Sensor 5.8 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V, 3 V
- DiodesZetex Hall Effect Sensor 4 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V, 3.8 V
- DiodesZetex Hall Effect Sensor 720 μA 1 mA Omnipolar Solder Terminal Open Drain, 85 °C, -40 °C, 3.6 V, 1.6 V
- Infineon Hall Effect Sensor 1.6 mA 25 mA Bipolar Hall Latch Solder Pin Open Drain Latching, 107 °C, -40 °C, 32 V, 3 V
