Spelsberg AKL Series Grey Polystyrene Enclosure, IP65, IK07 132 mm, 450 mm, 300 mm

Grey (RAL 7035) polystyrene base and transparent Polycarbonate cover with no pre-embossing and no knockouts. The Polystyrene box enclosure also includes polyurethane double membrane sealing, and polyamide 6 fibre glass reinforced cover screws. This enclosure box includes insulating plugs and attachment bushes.

114 mm;External height 132 mm

Rated insulation voltage AC 690 V

There are cable entries with this model.;Cable adaptors and sealing plugs included

This article is completely silicone free.;Also free from heavy metal and PVC.

Both are plastic and resistant to rust and corrosion and will not dent – unlike metal. Both at halogen free which is important to consider for applications where the possibility of fire can lead to exposure to harmful fumes.;Polystyrene is stronger than budget material like plastic, withstand knocks and has fair cable retention.;Polycarbonate is recommended for applications that may sustain heavy impact, better UV protection, resistant to temperature changes, external and internal use.

An enclosure box with knockouts is a hole that is built into the enclosure that has covering of plastic material covering the area of the required hole. You simply break the plastic material and you have a ready-made hole for mounting.

This item does have knockouts.

Entries End;15 x M20;2 x M20 / M25;1 x M32 / M40;Entries On Each Side;12 x M20;3 x M25 / M32

Based on 300mm wide x 132mm high module