STMicroelectronics MOSFET Gate Driver 1, 0.01 mA 3-Pin 5.5 V, SOT-223
- RS 제품 번호:
- 190-6803P
- 제조사 부품 번호:
- VNL5050N3TR-E
- 제조업체:
- STMicroelectronics
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 250 units (supplied on a reel)*
₩393,390.00
재고있음
- 350 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 250 - 490 | ₩1,573.56 |
| 500 + | ₩1,551.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 190-6803P
- 제조사 부품 번호:
- VNL5050N3TR-E
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Product Type | General Purpose Driver | |
| Output Current | 0.01mA | |
| Pin Count | 3 | |
| Fall Time | 10μs | |
| Package Type | SOT-223 | |
| Number of Outputs | 5 | |
| Driver Type | MOSFET | |
| Rise Time | 10μs | |
| Minimum Supply Voltage | 5.5V | |
| Number of Drivers | 1 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Length | 6.7mm | |
| Width | 3.7 mm | |
| Height | 1.8mm | |
| Standards/Approvals | No | |
| Mount Type | Surface | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Product Type General Purpose Driver | ||
Output Current 0.01mA | ||
Pin Count 3 | ||
Fall Time 10μs | ||
Package Type SOT-223 | ||
Number of Outputs 5 | ||
Driver Type MOSFET | ||
Rise Time 10μs | ||
Minimum Supply Voltage 5.5V | ||
Number of Drivers 1 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Length 6.7mm | ||
Width 3.7 mm | ||
Height 1.8mm | ||
Standards/Approvals No | ||
Mount Type Surface | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
The STMicroelectronics VNL5050N3-E are monolithic devices made using VI Power technology, intended for driving resistive or inductive loads with one side connected to the battery. This built-in thermal shutdown protect the chip from over temperature and short-circuit. The output current limitation protect the device in an overload condition. In case of long duration overload, the device limit the dissipated power to a safe level up to thermal shutdown intervention. It has thermal shutdown, with automatic restart, allows the device to recover normal operation as soon as a fault condition disappears. It used fast demagnetization of inductive loads is achieved at turn-off.
ESD protection
Overvoltage clamp
Current and power limitation
Very low standby current