Cynergy3 LFS Series Paddle Flow Switch for Liquid, 15.2L/min, 19 L/min Min, 83.3L/min Max

모든 Flow Sensors 열람하기

Subtotal (1 unit)*

₩706,740.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩706,740.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
780-0119
제조사 부품 번호:
LFS-01
제조업체:
Cynergy3
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Cynergy3

Media Monitored

Liquid

Product Type

Flow Switch

Device Type

Paddle

Minimum Flow Rate

15.2, 19L/min

Maximum Flow Rate

83.3L/min

Housing Material

Aluminium Alloy

Connection Type

1 in NPT

Maximum Pressure

20bar

IP Rating

IP65

Maximum Supply Voltage

230V

Minimum Media Temperature

-30°C

Maximum Media Temperature

75°C

Minimum Operating Temperature

-30°C

Maximum Operating Temperature

75°C

Series

LFS

Standards/Approvals

ISO 9001

Current Rating

1A

COO (Country of Origin):
CN

Sensata Cynergy3 Vertical Paddle Flow Switch, 1A, 20 Bar - LFS Series - LFS-01


Use this paddle flow switch from Sensata Cynergy3 to accurately control the flow of substances in a pipe. The vertically mounted flow sensor's electrical connections convey a trip motion to a pump to adjust flow rates that are too high or too low. The switch's paddle is constructed from high-grade stainless steel, which is highly corrosion-resistant and able to withstand the abrasive effects of harsh chemicals. It's suitable for flow detection in pipes with a bore size of 1in to 3in, such as those found in emergency sprinkler systems.

Features & Benefits


• Aluminium alloy housing to prevent rust and extend the unit's service life

• IP65 (ingress protection) rating means the float's electrical connections are protected from dirt and moisture

• High maximum operating pressure of 20 bar for use in heavy-duty applications

• Supplied with a cable gland for making quick and secure electrical connections

Where do you install a flow switch in a pipe?


You should place this switch where there's a straight run in a pipe on either side of the switch. As it's a vertical sensor, it needs to be installed in a pipe with an upward flow direction.

관련된 링크들