Festo SFAB Series Flow Sensor Flow Sensor for Air, 0.1L/min Min, 10L/min Max

모든 Flow Sensors 열람하기
현재 액세스할 수 없는 재고 정보

대체품

이 제품은 현재 공급 불가입니다. 아래 제품들은 당사에서 추천드리는 대체품입니다.

presentation
Festo SFAB Series Flow Rate Monitoring Sensor Flow Sensor for Air, 0.1L/min Min, 10L/min Max
RS 제품 번호
343-110

개당

₩1,030,980.00

RS 제품 번호:
288-8222
제조사 부품 번호:
SFAB-10U-WQ6-2SA-M12
제조업체:
Festo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Festo

Media Monitored

Air

Product Type

Flow Sensor

Device Type

Flow Sensor

Minimum Flow Rate

0.1L/min

Maximum Flow Rate

10L/min

Housing Material

Reinforced Polyamide

Connection Type

Plug

Maximum Pressure

10bar

Minimum Media Temperature

0°C

Maximum Supply Voltage

30V

IP Rating

IP65

Maximum Media Temperature

50°C

Minimum Operating Temperature

0°C

Maximum Operating Temperature

50°C

Series

SFAB

Standards/Approvals

CE mark, UL E322346, To EU EMC Directive, To UK RoHS instructions, To UK instructions for EMC, RCM trademark c UL us - Recognised (OL), CE, In accordance with EU RoHS Directive

Current Rating

120mA

Model Number

565387

COO (Country of Origin):
BG

Festo SFAB Series Flow Sensor, 10L/min Maximum Flow Rate, IP65 - SFAB-10U-WQ6-2SA-M12, Numeric Part Number:565387


This flow sensor measures volumetric flow of compressed Air and nitrogen within pneumatic systems using a thermal heat-loss principle. It is intended for inline measurement where a compact, plug-connected device provides direct numeric readouts and status switching for control tasks in automation, electronics and mechanical installations.

Features & Benefits


• Measures 0.1 to 10 L/min for precision low-flow control
• Two switchable PNP/NPN outputs support direct logic interfacing
• 4 to 20 mA analogue output enables proportional signalling to controllers
• IP65 rated reinforced polyamide housing resists ingress in washdown areas
• Operates from DC 15V to 30V with 120 mA supply current for standard systems
• Withstands operating pressures up to 10 bar for pneumatic robustness

Applications


• Suitable for monitoring leak-test stations in production lines
• Ideal for flow feedback in pneumatic valve control loops
• Used with compressed-air conditioning systems for flow balancing
• Can be used for inline measurement in lab gas-supply set-ups

How is the unit electrically connected on-site?


It uses a 5-core M12x1 A-coded plug connection compatible with common industrial cabling and includes reverse-polarity protection on all electrical connections.

How does the display support commissioning and checks?


An illuminated multi-colour LCD shows selectable units (l, l/h, l/min, m3, scf, scfm) and allows teach-in setup and PIN protection for tamper prevention.

What accuracy and stability can be expected during operation?


Typical accuracy is ±(3% of measured Value + 0.3% FS) with repetition offset 0.2% FS and span repeatability 0.8% FS, and a temperature coefficient of about 0.1% FS/K.

How is the sensor mounted and connected pneumatically?


It mounts via through-holes, H-rail or wall bracket and accepts tubing with 6mm outside diameter for the process connection.

What protections support electrical reliability?


The device includes short-circuit and overload protection, and switching outputs can be configured as normally open or normally closed for flexible integration.

관련된 링크들