제조사부품번호

Endress+Hauser DMA25 Series Electromagnetic Flowmeter Flow Meter for Liquid, 0.2L/min Min, 150L/min Max

RS 제품 번호:: 256-6154
Distrelec 제품 번호:: 303-51-193
제조사 부품 번호:: DMA25-AAAAA1
제조업체:: Endress+Hauser

Endress+Hauser DMA25 Series Electromagnetic Flowmeter Flow Meter for Liquid, 0.2L/min Min, 150L/min Max

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 unit)*

₩1,223,020.00

추가로 2026년 8월 17일 부터 48 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩1,223,020.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 256-6154
Distrelec 제품 번호:: 303-51-193
제조사 부품 번호:: DMA25-AAAAA1
제조업체:: Endress+Hauser

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Endress+Hauser
	Media Monitored	Liquid
	Product Type	Flow Meter
	Device Type	Electromagnetic Flowmeter
	Minimum Flow Rate	0.2L/min
	Maximum Flow Rate	150L/min
	Housing Material	316L Stainless Steel
	Connection Type	Thread
	Maximum Pressure	16bar
	Minimum Media Temperature	-10°C
	Maximum Supply Voltage	30V dc
	IP Rating	IP65, IP67
	Minimum Operating Temperature	-10°C
	Maximum Media Temperature	70°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	CE mark
	Series	DMA25

	모두 선택
	브랜드 Endress+Hauser
	Media Monitored Liquid
	Product Type Flow Meter
	Device Type Electromagnetic Flowmeter
	Minimum Flow Rate 0.2L/min
	Maximum Flow Rate 150L/min
	Housing Material 316L Stainless Steel
	Connection Type Thread
	Maximum Pressure 16bar
	Minimum Media Temperature -10°C
	Maximum Supply Voltage 30V dc
	IP Rating IP65, IP67
	Minimum Operating Temperature -10°C
	Maximum Media Temperature 70°C
	Maximum Operating Temperature 60°C
	Standards/Approvals CE mark
	Series DMA25

COO (Country of Origin):: FR

Endress+Hauser DMA25 Series Flow Meter, 150 L/min Maximum Flow Rate, 16 Bar Maximum Pressure - DMA25-AAAAA1

This flow metre is an inline electromagnetic device designed to measure liquid flow in industrial settings. It operates across a broad flow range and is intended for use where robust construction and protection against ingress are required. The unit connects via threaded fittings and is suitable for environments that demand stainless-steel wetted parts and regulated electrical supply.

Features and Benefits:

• Electromagnetic measurement delivers high accuracy across range 0.2-150 L/min
• 316L stainless steel housing resists corrosion in process lines
• IP65 and IP67 protection enables washdown and temporary immersion
• Rated for media temperatures up to 70°C for warm-fluid handling
• 16 bar maximum pressure supports pressurised pipeline systems
• Accepts up to 30V DC supply for low-voltage industrial control

Applications

• Suitable for water treatment dosing and monitoring loops
• Ideal for chemical feed control with corrosive liquids
• Used for flow verification in food and beverage processing lines
• Can be used for plant utilities metering in production facilities
• Used with control systems requiring threaded inline sensors

What connection type is used for installation in a pipework system?

Threaded connections allow direct inline mounting into existing threaded pipe fittings and adaptors.

How does the device perform in washdown or rainy conditions?

The enclosure meets IP65 and IP67 levels, protecting electronics during routine washdowns and brief submersion events.

What temperature range can the transmitter and measured media tolerate?

The instrument operates in ambient conditions down to -10°C while handling media temperatures as high as 70°C.

What maximum supply and pressure constraints must be observed?

The unit must not exceed a 30V DC supply and is qualified for process pressures up to 16 bar.

Which media is suitable for measurement with this technology?

The sensor is designed for conductive liquids, using electromagnetic principles to determine volumetric flow.