Endress+Hauser DMA15 Series Flow Meter 0.05L/min to 35L/min, Male, G 1/2

This flow meter measures liquid flow in process lines and provides precise monitoring across low to moderate flow rates. Constructed for corrosive and hygienic environments, it integrates a compact inline configuration with male G1/2 threaded connections for straightforward installation in existing piping. The unit is suitable for ambient applications where a CE‑marked device is required and where operation up to 60°C is needed.

• 0.05-35 L/min range delivers accurate control for low to mid flows
• 316L wetted parts resist chemical and sanitary corrosion
• G1/2 male thread enables simple inline replacement
• CE marking ensures conformity with applicable EU directives
• 60°C maximum temperature supports warm process fluids

• Suitable for dosing and metering of liquid chemicals in production
• Used for sanitary liquid transfer in food and beverage lines
• Ideal for laboratory and pilot‑plant flow control tasks
• Can be used for recirculation monitoring in small process loops

All wetted surfaces are stainless steel 316L, which provides compatibility with a wide range of aqueous and mildly aggressive liquids and supports hygienic cleaning where required.

The unit uses a male G1/2 threaded connection to mate directly with standard G‑threaded fittings and adaptors for inline installation.

The instrument covers flows from 0.05 L/min up to 35 L/min, accommodating both very low metering and higher throughput within the same device.

The maximum operating fluid temperature is 60°C, which should be respected to maintain material integrity and measurement performance.