제조사부품번호

Nexperia 74HCT574D,652 Octal D Type Flip Flop IC, 3-State, 20-Pin SOIC

RS 제품 번호:: 177-6922P
제조사 부품 번호:: 74HCT574D,652
제조업체:: Nexperia

Nexperia 74HCT574D,652 Octal D Type Flip Flop IC, 3-State, 20-Pin SOIC

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

사용할 수 없음

RS는 더 이상 이 제품을 입고하지 않습니다.

대체품

이 제품은 현재 공급 불가입니다. 아래 제품들은 당사에서 추천드리는 대체품입니다.

Nexperia 74HCT574D,652 Octal D Type Flip Flop IC, 3-State, 20-Pin SOIC

RS 제품 번호: 178-6962

개당가격(38개가 1튜브안에)

₩52,280.00

RS 제품 번호:: 177-6922P
제조사 부품 번호:: 74HCT574D,652
제조업체:: Nexperia

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Nexperia
	Logic Family	HCT
	Logic Function	D Type
	Input Type	Single Ended
	Output Type	3 State
	Output Signal Type	Single Ended
	Triggering Type	Positive Edge
	Polarity	Non-Inverting
	Mounting Type	Surface Mount
	Package Type	SOIC
	Pin Count	20
	Number of Elements per Chip	8
	Maximum Propagation Delay Time @ Maximum CL	33 ns @ 4.5 V
	Dimensions	13 x 7.6 x 2.45mm
	Maximum Operating Supply Voltage	5.5 V
	Length	13mm
	Maximum Operating Temperature	+125 °C
	Propagation Delay Test Condition	50pF
	Height	2.45mm
	Minimum Operating Temperature	-40 °C
	Minimum Operating Supply Voltage	4.5 V
	Width	7.6mm

	모두 선택
	브랜드 Nexperia
	Logic Family HCT
	Logic Function D Type
	Input Type Single Ended
	Output Type 3 State
	Output Signal Type Single Ended
	Triggering Type Positive Edge
	Polarity Non-Inverting
	Mounting Type Surface Mount
	Package Type SOIC
	Pin Count 20
	Number of Elements per Chip 8
	Maximum Propagation Delay Time @ Maximum CL 33 ns @ 4.5 V
	Dimensions 13 x 7.6 x 2.45mm
	Maximum Operating Supply Voltage 5.5 V
	Length 13mm
	Maximum Operating Temperature +125 °C
	Propagation Delay Test Condition 50pF
	Height 2.45mm
	Minimum Operating Temperature -40 °C
	Minimum Operating Supply Voltage 4.5 V
	Width 7.6mm

The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Mixed 5 V and 3.3 V applications

Improved signal integrity with integrated termination resistors

High noise immunity

Flow through pin out for easy layout

Wide supply voltage range

Low propagation delay

Overvoltage tolerant input options

Integrated source termination resistor options

Bus hold options

Key applications

Frequency division

Controlled delays

Interface between asynchronous and synchronous systems

Nexperia 74HCT574D,652 Octal D Type Flip Flop IC, 3-State, 20-Pin SOIC

대체품

관련된 링크들