Microchip Split Gate 4 MB SPI Flash Memory 8-Pin SOIC
- RS 제품 번호:
- 264-8831P
- 제조사 부품 번호:
- SST25VF040B-50-4I-SAF-T
- 제조업체:
- Microchip
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 50 units (supplied on a continuous strip)*
₩84,036.00
재고있음
- 2,935 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 50 - 95 | ₩1,680.72 |
| 100 - 245 | ₩1,646.88 |
| 250 - 995 | ₩1,614.92 |
| 1000 + | ₩1,582.96 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 264-8831P
- 제조사 부품 번호:
- SST25VF040B-50-4I-SAF-T
- 제조업체:
- Microchip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Microchip | |
| Product Type | Flash Memory | |
| Memory Size | 4MB | |
| Interface Type | SPI | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Organisation | 512k x 8 | |
| Mount Type | Surface | |
| Maximum Clock Frequency | 50MHz | |
| Cell Type | Split Gate | |
| Minimum Supply Voltage | 2.3V | |
| Maximum Supply Voltage | 3.6V | |
| Timing Type | Synchronous | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS, JEDEC | |
| Width | 5 mm | |
| Length | 6mm | |
| Automotive Standard | No | |
| Supply Current | 15mA | |
| Series | SST25VF | |
| 모두 선택 | ||
|---|---|---|
브랜드 Microchip | ||
Product Type Flash Memory | ||
Memory Size 4MB | ||
Interface Type SPI | ||
Package Type SOIC | ||
Pin Count 8 | ||
Organisation 512k x 8 | ||
Mount Type Surface | ||
Maximum Clock Frequency 50MHz | ||
Cell Type Split Gate | ||
Minimum Supply Voltage 2.3V | ||
Maximum Supply Voltage 3.6V | ||
Timing Type Synchronous | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS, JEDEC | ||
Width 5 mm | ||
Length 6mm | ||
Automotive Standard No | ||
Supply Current 15mA | ||
Series SST25VF | ||
The Microchip serial flash memory features a four-wire, SPI compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF040B device is enhanced with improved operating frequency for lower power consumption. This SPI serial flash memory is manufactured with SST proprietary, high-performance CMOS Super flash technology. The split-gate cell design and thick-oxide tunnelling injector attain better reliability and manufacturability compared with alternate approaches. This device significantly improve performance and reliability, while lowering power consumption.
SPI Compatible: Mode 0 and Mode 3
Supports 50 MHz SPI clock
Active Read Current: 10 mA (typical)
Program & Erase Current: 30mA (max)
Standby Current: 5 μA (typical)
Chip-Erase Time: 35 ms (typical)
Sector-/Block-Erase Time: 18 ms (typical)
Byte-Program Time: 7 μs (typical)
RoHS compliant