Microchip Split Gate 1 MB SPI Flash Memory 8-Pin SOIC
- RS 제품 번호:
- 264-8826P
- 제조사 부품 번호:
- SST25VF010A-33-4I-SAE-T
- 제조업체:
- Microchip
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 50 units (supplied on a continuous strip)*
₩68,835.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 50 - 90 | ₩1,376.70 |
| 100 - 240 | ₩1,349.40 |
| 250 - 990 | ₩1,322.10 |
| 1000 + | ₩1,294.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 264-8826P
- 제조사 부품 번호:
- SST25VF010A-33-4I-SAE-T
- 제조업체:
- Microchip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Microchip | |
| Product Type | Flash Memory | |
| Memory Size | 1MB | |
| Interface Type | SPI | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Mount Type | Surface | |
| Maximum Clock Frequency | 80MHz | |
| Cell Type | Split Gate | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Supply Voltage | 2.3V | |
| Timing Type | Synchronous | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 6mm | |
| Standards/Approvals | RoHS, JEDEC | |
| Supply Current | 10mA | |
| Automotive Standard | No | |
| Series | SST25VF | |
| 모두 선택 | ||
|---|---|---|
브랜드 Microchip | ||
Product Type Flash Memory | ||
Memory Size 1MB | ||
Interface Type SPI | ||
Package Type SOIC | ||
Pin Count 8 | ||
Mount Type Surface | ||
Maximum Clock Frequency 80MHz | ||
Cell Type Split Gate | ||
Maximum Supply Voltage 3.6V | ||
Minimum Supply Voltage 2.3V | ||
Timing Type Synchronous | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 6mm | ||
Standards/Approvals RoHS, JEDEC | ||
Supply Current 10mA | ||
Automotive Standard No | ||
Series SST25VF | ||
The Microchip serial flash memory features a four-wire, SPI-compatible interface that allows for a low pin-count package occupying less board space and ultimately lowering total system costs. This SPI serial flash memory is manufactured with SST proprietary, high performance CMOS Super flash Technology. The split-gate cell design and thick-oxide tunnelling injector attain better reliability and manufacturability compared with alternate approaches.
Serial Interface Architecture– SPI Compatible: Mode 0 and Mode 3
Write protection through Block-Protection bits in status register
Low power consumption
Flexible erase capability– uniform 4 Kbyte sectors– uniform 32 Kbyte overlay blocks
End-of-Write Detection– Software Status
Non-Pb (lead-free) devices are RoHS compliant
-40°C to +85°C industrial temperature range