Festo 1/2 in FRL Assembly, Manual Drain, 40 μm Filtration Size Integrated Pressure Gauge

본 제품군 열람하기

Subtotal (1 unit)*

₩831,441.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 6월 29일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩831,441.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
288-2819
제조사 부품 번호:
MSB6-1/2:J1D1A1-WP
제조업체:
Festo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Festo

Port Size

1/2 in

Product Type

FRL Assembly

Integrated Pressure Gauge

Yes

Maximum Flow Rate

3100L/min

Drain Type

Manual

Connection Thread Standard

G

Series

MS

Filtration Size

40μm

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

60°C

Maximum Operating Pressure

18 bar

Standards/Approvals

RoHS

Bowl Material

Polycarbonate

COO (Country of Origin):
HU

Festo MS FRL Assembly, 1/2 Port Size, 18 Bar Maximum Operating Pressure - MSB6-1/2:J1D1A1-WP, Numeric Part Number:530222


This FRL assembly conditions compressed Air for industrial pneumatic systems by combining filtration, pressure regulation and lubrication into a single unit. It is designed for integration into control and automation equipment where treated Air is required to maintain actuator and valve performance. The assembly accepts G-thread connections and is suited to systems operating across typical workshop temperatures.

Features and Benefits:


• 3100 L/min maximum flow supports high-demand pneumatic circuits
• 18 bar maximum pressure enables robust system headroom
• 40 μm filtration removes fine particulates to protect downstream components
• Polycarbonate bowl permits Visual fluid and condensate inspection
• Integrated pressure gauge gives immediate system pressure feedback
• Manual drain provides simple condensate evacuation without tools

Applications


• Suitable for upstream Air treatment on industrial automation lines
• Ideal for pneumatic supply to valves and cylinders in assembly plants
• Used with high-flow blow-off and actuated tooling systems
• Can be used for compressed Air preparation in test rigs and labs

What temperature range can it withstand in continuous service?


The unit is rated to operate between -10°C and 60°C, permitting use in typical indoor and sheltered industrial environments.

How is the unit connected into existing pneumatic piping?


It uses G-standard threaded ports with a 1/2 in port size for direct screw-in installation to compatible fittings.

What particulate size will the filter capture and how does that affect maintenance?


The filter element captures particles down to 40 μm, reducing wear on valves and actuators and extending service intervals for downstream components.

Does the assembly include Visual indication of pressure without additional instrumentation?


Yes, the built-in pressure gauge provides on-unit pressure readout so operators can verify supply pressure at a glance.

관련된 링크들