Broadcom HFBR-57E0LZ Fibre Optic Transceiver, LC Connector, 155.52 MBd 1380 nm 20-Pin
- RS 제품 번호:
- 189-4859
- 제조사 부품 번호:
- HFBR-57E0LZ
- 제조업체:
- Broadcom
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 tray of 10 units)*
₩1,198,612.80
재고있음
- 10 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | Per Tray* |
|---|---|---|
| 10 - 10 | ₩119,861.28 | ₩1,198,612.80 |
| 20 - 30 | ₩117,460.52 | ₩1,174,605.20 |
| 40 + | ₩115,112.40 | ₩1,151,124.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 189-4859
- 제조사 부품 번호:
- HFBR-57E0LZ
- 제조업체:
- Broadcom
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Broadcom | |
| Product Type | Fibre Optic Transceiver | |
| Maximum Data Rate | 155.52MBd | |
| Connector Shape | Rectangular | |
| Transmitter Typical Rise Time | 1.2ns | |
| Transmitter Typical Fall Time | 2ns | |
| Receiver Jitter at Maximum Data Rate | 2.14ns | |
| Number of Pins | 20 | |
| Mount Type | Surface Mount | |
| Connector Type | LC | |
| Transmitter Jitter at Maximum Data | 0.6ns | |
| Wavelength of Peak Sensitivity | 1380nm | |
| Height | 13mm | |
| Width | 13.8 mm | |
| Length | 57.8mm | |
| Standards/Approvals | RoHS, UL | |
| Output Signal Type | TTL | |
| Series | HFBR-57 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Broadcom | ||
Product Type Fibre Optic Transceiver | ||
Maximum Data Rate 155.52MBd | ||
Connector Shape Rectangular | ||
Transmitter Typical Rise Time 1.2ns | ||
Transmitter Typical Fall Time 2ns | ||
Receiver Jitter at Maximum Data Rate 2.14ns | ||
Number of Pins 20 | ||
Mount Type Surface Mount | ||
Connector Type LC | ||
Transmitter Jitter at Maximum Data 0.6ns | ||
Wavelength of Peak Sensitivity 1380nm | ||
Height 13mm | ||
Width 13.8 mm | ||
Length 57.8mm | ||
Standards/Approvals RoHS, UL | ||
Output Signal Type TTL | ||
Series HFBR-57 | ||
HFBR-57E0 Series Fibre-Optic Transceiver
The HFBR-57E0 series are multimode transceivers with a pluggable LC connector for ATM, FDDI, Fast Ethernet and SONET OC-3/SDH STM-1. The small form factor transceiver can be used in multimode fibre fast Ethernet and SONET OC-3 for ATM switches, routers and SONET/SDH switch set-ups. The Avago Technologies transceiver works on a 1300nm wavelength.
The transmitter part uses a 1300 nm InGaAsP LED and the receiver has InGaAs PIN photodiode together with a silicon trans impedance preamplifier IC.
RoHS Compliant
Manufactured in an ISO 9001 certified facility
Temperature range: 0°C to +70°C HFBR-57E0LZ/PZ
Full compliance with ATM Forum UNI SONET OC-3 multimode fibre physical layer specification
Full compliance with the optical performance requirements of the FDDI PMD Standard
Full compliance with the optical performance requirements of 100Base-FX version of IEEE802.3u
Industry standard Small Form Pluggable (SFP) package
LC duplex connector optical interface
Operates with 62.5/125μm and 50/125μm multimode fibre
Single +3.3 V power supply
+3.3 V TTL LOS output
Receiver outputs: squelch enabled
Applications: OC-3 SFP transceivers are designed for ATM LAN and WAN applications
Fibre Optics, Avago Technologies
관련된 링크들
- Broadcom Fibre Optic Transceiver, LC Connector, 155.52 MBd 1380 nm 20-Pin
- Broadcom HFBR-5963ALZ Fibre Optic Transceiver, LC Connector, 155 Mbps 1380 nm 10-Pin
- Broadcom Fibre Optic Transceiver, LC Connector, 155 Mbps 1380 nm 10-Pin
- Broadcom HFBR-2316TZ 155 MBd 1300 nm Fibre Optic Receiver, ST Connector
- Broadcom HFBR-57E5APZ 125 MBd Fibre Optic Receiver, Rectangular, LC Connector
- Broadcom 155 MBd 1300 nm Fibre Optic Receiver, ST Connector
- Broadcom Fibre Optic Transceiver, SFP Connector, 125 MBd 1380 nm 20-Pin
- Broadcom 125 MBd Fibre Optic Receiver, Rectangular, LC Connector