HellermannTyton Connectivity LC to to LC Fibre Optic Cable, Yellow, 1 m

Subtotal (1 unit)*

₩30,459.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 23 개 단위 배송 준비 완료
  • 추가로 2026년 5월 19일 부터 40 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩30,459.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
269-5046
제조사 부품 번호:
FLCXXS2-LCLCDY-01.0M
제조업체:
HellermannTyton Connectivity
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

HellermannTyton Connectivity

Connector Type A

LC

Cable Length

1m

Product Type

Fibre Optic Cable

Connector Type B

LC

Jacket Colour

Yellow

Standards/Approvals

IEC 60332-1, IEC 60793-2-50:2012, IEC 61754, IEC 60793-2-10:2011

Series

OS2

COO (Country of Origin):
GB

HellermanTyton OS2 Series Fibre Optic Cable, 1m Cable Length, Yellow Jacket - FLCXXS2-LCLCDY-01.0M


This Fibre optic cable provides singlemode connectivity for high‑speed telecom and datacom links in industrial and network environments. It is intended for patching between LC terminations and supports metropolitan and access network requirements while maintaining a Compact 3mm profile and a yellow, low smoke zero halogen sheath for use where reduced toxic emissions are required.

Features & Benefits


• Singlemode OS2 performance for long‑distance signal integrity
• Low insertion loss down to 0.3 dB to reduce link attenuation
• LSZH jacket for reduced smoke and halogen emissions
• Operates across −20 to +60 °C for varied site conditions

**Applications**


• Suitable for Fibre patching in telecom and datacom installations
• Ideal for LC‑to‑LC jumpers in metropolitan access networks
• Used for rack‑to‑rack optical links in automation systems
• Can be used for high‑speed singlemode testing and lab setups

Which connector form factor does it terminate with for Compact panels?


It uses LC terminations which conform to IEC 61754 connector geometries for small‑form‑factor panel mounting.

What optical specifications define its singlemode classification?


The Fibre meets OS2 performance with attenuation characteristics compliant with IEC 60793‑2‑50 and is specified for use at a 1310 nm test wavelength.

What nominal cable geometry should installers expect for routing through trays and conduits?


The cable has a 3mm diameter suitable for high‑density trays and confined conduit runs.

관련된 링크들