Murata Ferrite Bead 0.5 mm (Surface) (0402) (Chip Ferrite Bead), 29.6 Ω impedance at 25 MHz, 80 Ω impedance at 100 MHz,
- RS 제품 번호:
- 223-4888P
- 제조사 부품 번호:
- BLM15PE800SH1D
- 제조업체:
- Murata
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
- RS 제품 번호:
- 223-4888P
- 제조사 부품 번호:
- BLM15PE800SH1D
- 제조업체:
- Murata
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Murata | |
| Product Type | Ferrite Bead | |
| Package Type | 0402 | |
| Impedance at 25 MHz | 29.6Ω | |
| Impedance at 50 MHz | 55.1Ω | |
| Impedance at 100 MHz | 80Ω | |
| Packaging | Tape & Reel | |
| Impedance at 300 MHz | 123Ω | |
| Impedance at 1 GHz | 118Ω | |
| Current Rating | 1A | |
| Sub Type | Chip Ferrite Bead | |
| Mount Type | Surface | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Length | 1mm | |
| Maximum DC Resistance | 70mΩ | |
| Depth | 0.5mm | |
| Standards/Approvals | REACH, RoHS | |
| Height | 0.5mm | |
| Series | BLM15 | |
| Material | Ferrite | |
| Automotive Standard | AEC-Q200 | |
| Application | EMI Suppression Filter, DC Power Line | |
| 모두 선택 | ||
|---|---|---|
브랜드 Murata | ||
Product Type Ferrite Bead | ||
Package Type 0402 | ||
Impedance at 25 MHz 29.6Ω | ||
Impedance at 50 MHz 55.1Ω | ||
Impedance at 100 MHz 80Ω | ||
Packaging Tape & Reel | ||
Impedance at 300 MHz 123Ω | ||
Impedance at 1 GHz 118Ω | ||
Current Rating 1A | ||
Sub Type Chip Ferrite Bead | ||
Mount Type Surface | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Length 1mm | ||
Maximum DC Resistance 70mΩ | ||
Depth 0.5mm | ||
Standards/Approvals REACH, RoHS | ||
Height 0.5mm | ||
Series BLM15 | ||
Material Ferrite | ||
Automotive Standard AEC-Q200 | ||
Application EMI Suppression Filter, DC Power Line | ||
- COO (Country of Origin):
- JP
The Murata BLM15PE series chip ferrite bead is designed to function nearly as a resistor at noise frequencies, which greatly reduces the possibility of resonance and leaves signal wave forms undistorted. It is effective in circuits without stable ground lines. It can be used in high current circuits due to its low DC resistance. It has impedance of 80 ohm.
Nickel barrier structure of the external electrodes provides excellent solder heat resistance
Operating temperature range from -55 °C to 125 °C
Does not need a connection to ground