Microchip ENC28J60-I/SP, Stand-Alone Ethernet Controller, 3.1 V SPI, 28-Pin 3.6V
- RS 제품 번호:
- 698-8981P
- 제조사 부품 번호:
- ENC28J60-I/SP
- 제조업체:
- Microchip
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 4 units (supplied in a tube)*
₩23,537.60
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 4 - 7 | ₩5,884.40 |
| 8 + | ₩5,771.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 698-8981P
- 제조사 부품 번호:
- ENC28J60-I/SP
- 제조업체:
- Microchip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Microchip | |
| Product Type | Stand-Alone Ethernet Controller | |
| Sub Type | Controller | |
| Communication Mode | SPI | |
| Interface Type | SPI | |
| Number of Ports | 1 | |
| Standard Supported | IEEE 802.3 | |
| Mount Type | Through Hole | |
| Pin Count | 28 | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 7.4 mm | |
| Standards/Approvals | RoHS | |
| Minimum Supply Voltage | 3.1V | |
| Height | 5.02mm | |
| Length | 35.5mm | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Microchip | ||
Product Type Stand-Alone Ethernet Controller | ||
Sub Type Controller | ||
Communication Mode SPI | ||
Interface Type SPI | ||
Number of Ports 1 | ||
Standard Supported IEEE 802.3 | ||
Mount Type Through Hole | ||
Pin Count 28 | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Width 7.4 mm | ||
Standards/Approvals RoHS | ||
Minimum Supply Voltage 3.1V | ||
Height 5.02mm | ||
Length 35.5mm | ||
Automotive Standard No | ||
ECN28J60 10Base-T Ethernet Controllers
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for Faster memory copying and a max speed of 25Mhz.
Features and Benefits:
Applications:
PHY and MAC?
PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.