Microchip LAN9252/PT, Ethernet Controller, 3.3 V 100 Mbps SPI, 64-Pin 3.3 V
- RS 제품 번호:
- 235-4642
- 제조사 부품 번호:
- LAN9252/PT
- 제조업체:
- Microchip
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩15,472.40
제한된 재고
- 추가로 2026년 2월 09일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 9 | ₩15,472.40 |
| 10 - 24 | ₩15,171.60 |
| 25 - 49 | ₩14,870.80 |
| 50 - 74 | ₩14,570.00 |
| 75 + | ₩14,269.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 235-4642
- 제조사 부품 번호:
- LAN9252/PT
- 제조업체:
- Microchip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Microchip | |
| Product Type | Ethernet Controller | |
| Maximum Data Rate | 100Mbps | |
| Communication Mode | Full Duplex/Half Duplex | |
| Number of Transceivers | 2 | |
| Loopback Mode | Internal | |
| Standard Supported | IEEE 802.3u | |
| Interface Type | SPI | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 64 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Height | 1.2mm | |
| Standards/Approvals | No | |
| Length | 10mm | |
| Minimum Supply Voltage | 3.3V | |
| Width | 10 mm | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Microchip | ||
Product Type Ethernet Controller | ||
Maximum Data Rate 100Mbps | ||
Communication Mode Full Duplex/Half Duplex | ||
Number of Transceivers 2 | ||
Loopback Mode Internal | ||
Standard Supported IEEE 802.3u | ||
Interface Type SPI | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 64 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Height 1.2mm | ||
Standards/Approvals No | ||
Length 10mm | ||
Minimum Supply Voltage 3.3V | ||
Width 10 mm | ||
Automotive Standard No | ||
The Microchip LAN9252 series is a 2/3-port EtherCAT device controller with dual integrated Ethernet PHYs which each contain a full-duplex 100BASE-TX transceiver and support 100Mbps operation. The LAN9252 supports HP Auto-MDIX, allowing the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external Fibre transceiver. This device provides system developers a cost-effective solution for realizing EtherCAT device solutions.
Dual Integrated Ethernet PHYs with HP Auto-MDIX
Cable diagnostic support
100 Base FX support via external transceiver
1.8V to 3.3V variable voltage I/O
Integrated 1.2V core regulator for single 3.3V operation
Low pin count, high integration and small body size package
관련된 링크들
- Microchip LAN9252/PT, Ethernet Controller, 100Mbps, SPI, 3.3 V, 64-Pin TQFP-EP
- Microchip LAN9252I/PT, Ethernet Controller, 100Mbps MDI, MDIX, MII, RMII, Host Bus, 3.3 V, 64-Pin TQFP
- Microchip EtherCAT SPI EVB-LAN9252-SPI Interface Board for RJ45 / 8P8C connectors EVB-LAN9252-SPI
- Microchip LAN9252I/ML, Ethernet Controller, 100Mbps MDI, MDIX, MII, RMII, Host Bus, 3.3 V, 64-Pin QFN
- Microchip ENC424J600-I/PT, Ethernet Controller, 10Mbps MII, MIIM, Serial-SPI, 3.3 V, 44-Pin TQFP
- Microchip ENC624J600-I/PT, Ethernet Controller, 10Mbps MII, MIIM, Serial-SPI, 3.3 V, 64-Pin TQFP
- Microchip LAN9218-MT, Ethernet Controller, 10Mbps LAN, MII, Host Bus, SMI, 3.3 V, 100-Pin TQFP
- Microchip LAN9218-MT, Ethernet Controller, 10Mbps, 3.3 V, 100-Pin TQFP
