Microchip KSZ8041TL, Physical Layer Transceiver, 3.3 V 100 Mbps RMII, MII, SMII, 48-Pin 3.3 V TQFP
- RS 제품 번호:
- 177-3876P
- 제조사 부품 번호:
- KSZ8041TL
- 제조업체:
- Microchip
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 65 units (supplied in a tray)*
₩319,797.40
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 65 - 120 | ₩4,919.96 |
| 125 + | ₩4,822.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 177-3876P
- 제조사 부품 번호:
- KSZ8041TL
- 제조업체:
- Microchip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Microchip | |
| Product Type | Physical Layer Transceiver | |
| Maximum Data Rate | 100Mbps | |
| Sub Type | Transceiver | |
| Communication Mode | MII, RMII, SMI | |
| Interface Type | RMII, MII, SMII | |
| Standard Supported | IEEE 802.3u | |
| Mount Type | Surface Mount | |
| Package Type | TQFP | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 48 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Height | 1.6mm | |
| Width | 7.1 mm | |
| Standards/Approvals | RoHS | |
| Length | 7.1mm | |
| Minimum Supply Voltage | 3.3V | |
| Automotive Standard | No | |
| Supply Current | 58.3mA | |
| 모두 선택 | ||
|---|---|---|
브랜드 Microchip | ||
Product Type Physical Layer Transceiver | ||
Maximum Data Rate 100Mbps | ||
Sub Type Transceiver | ||
Communication Mode MII, RMII, SMI | ||
Interface Type RMII, MII, SMII | ||
Standard Supported IEEE 802.3u | ||
Mount Type Surface Mount | ||
Package Type TQFP | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 48 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Height 1.6mm | ||
Width 7.1 mm | ||
Standards/Approvals RoHS | ||
Length 7.1mm | ||
Minimum Supply Voltage 3.3V | ||
Automotive Standard No | ||
Supply Current 58.3mA | ||
- COO (Country of Origin):
- US
The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver, which provides MII/RMII/SMII interfaces to transmit and receive data.
Single-chip 10Base-T/100Base-TX physical layer solution
Low power
Power consumption of <180mW
Power down and power saving modes
Built-in 1.8V regulator for core
Single power supply (3.3V)
HP auto MDI/MDI-X for reliable detection and correction for straight-through and crossover cables with disable and enable option
Robust operation over standard cables
MII Interface support (KSZ8041NL only)
RMII Interface Support
External 50MHz system clock (KSZ8041NL or KSZ8041TL/FTL)
25MHz crystal/clock input and 50MHz reference clock output to MAC (KSZ8041RNL)
SMII Interface Support
External 125MHz system clock and 12.5MHz sync clock from MAC (KSZ8041TL/FTL only)
Fiber support 100Base-FX (KSZ8041FTL only)
MIIM (MDC/MDIO) management bus to 6.25MHz for Rapid PHY register configuration
Interrupt pin option