HellermannTyton Connectivity CA Cat6 Cat6 Cable, 305 m, Purple, Unshielded Unscreened Low Smoke Fire Retardant Zero

Subtotal (1 Box of 305 metres)*

₩423,705.75

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
Box(es)
Per Box
미터당*
1 +₩423,705.75₩1,388.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
351-801
제조사 부품 번호:
CA202
제조업체:
HellermannTyton Connectivity
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

HellermannTyton Connectivity

Series

CA

Product Type

Cat6 Cable

Cable Length

305m

LAN Category

Cat6

Shield Type

Unshielded

Screened/Unscreened

Unscreened

Conductor Type

Solid

Jacket Material

Low Smoke Fire Retardant Zero Halogen

Jacket Colour

Purple

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

60°C

Cable CSA

23AWG

Standards/Approvals

BS EN 50288-10-1, C& UKCA, ANSI/TIA/EIA 568-C.2, IEC 61156-5, IEC 60332-1, IEC 61034, IEC 60332-3-24, BS EN 50173, IEC 60754-2, ISO 11801:2002

Fire Behaviour

LSHF-FR (FRNC, LSZH, B2ca, S1a

Conductor Material

Copper

Voltage

1000V

Outside Diameter

6.1mm

Number of Cores

4

COO (Country of Origin):
SK

HellermanTyton Cat6 Cable, 305m Cable Length, Purple Jacket - CA202


This cat6 cable is a purple, low-smoke zero-halogen U/UTP data cable supplied on a 305m box reel for structured cabling in commercial and industrial installations. It is intended for horizontal, riser and campus links supporting Ethernet, Gigabit and Power over Ethernet applications and is suitable for use where a flame-retardant B2ca-rated sheath is required.

Features & Benefits


• 23AWG solid copper conductor gives consistent signal integrity and low loss
• Characteristic impedance 100Ω ensures matched transmission across 1–100MHz
• Test voltage 1000V provides insulation stress verification during commissioning
• Low smoke zero halogen sheath B2ca,S1a,d1,a1 reduces toxic emissions in fire
• Nominal propagation velocity ≈67% improves timing predictability in long links

**Applications**


• Suitable for structured cabling in factory automation networks
• Ideal for PoE and PoE+ distribution to control devices and sensors
• Used for gigabit Ethernet backbones in plant and building risers
• Can be used with Category6 patch panels and outlets for channel links
• Suitable for campus and horizontal cabling where low-smoke sheath required

What conductor and pair construction should I expect for termination?


The cable uses 23AWG solid copper conductors with four twisted pairs and polyethylene insulation, arranged Blue/White-Blue, Orange/White-Orange, Green/White-Green, Brown/White-Brown for standard pair identification.

What mechanical limits apply during installation?


The maximum tensile force during installation is 100N and the minimum bend radius is 8x the outer diameter while pulling to preserve electrical characteristics.

What electrical measurements support link performance validation?


Key test values include DC loop resistance ≤154Ω/km, insulation resistance ≥5000MΩxkm at 500V, and nominal capacitance 48nF/km which inform link loss and continuity testing.

관련된 링크들