ITL Insulated Tools Ltd Series 5 Series Nylon Thermoplastic Shroud for Use with Series 5 Cut-Outs 25 mm x 50 mm x 34mm
- RS 제품 번호:
- 820-588
- 제조사 부품 번호:
- 03084
- 제조업체:
- ITL Insulated Tools Ltd
N
Subtotal (1 unit)*
₩11,256.00
재고있음
- 10 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩11,256.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 820-588
- 제조사 부품 번호:
- 03084
- 제조업체:
- ITL Insulated Tools Ltd
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | ITL Insulated Tools Ltd | |
| Product Type | Enclosure Accessory | |
| Accessory Type | Shroud | |
| Length | 50mm | |
| For Use With | Series 5 Cut-Outs | |
| Width | 34mm | |
| Material | Nylon Thermoplastic | |
| Height | 25mm | |
| Colour | Orange | |
| Series | Series 5 | |
| Standards/Approvals | VDE | |
| Hazardous Area Certification | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 ITL Insulated Tools Ltd | ||
Product Type Enclosure Accessory | ||
Accessory Type Shroud | ||
Length 50mm | ||
For Use With Series 5 Cut-Outs | ||
Width 34mm | ||
Material Nylon Thermoplastic | ||
Height 25mm | ||
Colour Orange | ||
Series Series 5 | ||
Standards/Approvals VDE | ||
Hazardous Area Certification No | ||
- COO (Country of Origin):
- GB
The ITL Insulated Tools Ltd shroud is a robust insulated tool is designed for high-performance electrical protection. Crafted from Nylon Thermoplastic, it ensures safety and reliability during live line working conditions.
100% tested to IEC 60900, Category C
Injection moulded from a unique Nylon Thermoplastic recipe
Withstands extreme impact and abrasion
관련된 링크들
- ITL Insulated Tools Ltd Series 7 Series Nylon Thermoplastic Shroud for Use with Series 7 Cut-Outs 25 mm x 60 mm x 31mm
- ITL Insulated Tools Ltd Series 7 Series Nylon Thermoplastic Shroud for Use with Series 7 Cut-Outs 25 mm x 52 mm x 30mm
- ITL Insulated Tools Ltd Nylon Thermoplastic Wedge
- EAO, For Use With Mounting Cut Outs
- Rittal SZ Series Clamps: Sheet Steel, Plastic Connector Gland for Use with Connector Cut-Outs 50 mm x 50 mm x 50mm
- Rittal DK Series Polyvinyl Chloride Protector for Use with For Covering Sharp Edges of Cut-outs 11 mm x 10 m x 6mm
- EAO, For Use With Mounting Cut Outs with Anti Twist Device
- ITL Insulated Tools Ltd 1-Piece Wrench Set, Nylon Thermoplastic VDE/1000V Approved