ITL Insulated Tools Ltd Series 7 Series Nylon Thermoplastic Shroud for Use with Series 7 Cut-Outs 25 mm x 60 mm x 31mm
- RS 제품 번호:
- 820-585
- 제조사 부품 번호:
- 03081
- 제조업체:
- ITL Insulated Tools Ltd
N
Subtotal (1 unit)*
₩9,046.00
재고있음
- 추가로 2026년 11월 23일 부터 11 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩9,046.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 820-585
- 제조사 부품 번호:
- 03081
- 제조업체:
- ITL Insulated Tools Ltd
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | ITL Insulated Tools Ltd | |
| Product Type | Enclosure Accessory | |
| Accessory Type | Shroud | |
| Length | 60mm | |
| For Use With | Series 7 Cut-Outs | |
| Width | 31mm | |
| Material | Nylon Thermoplastic | |
| Height | 25mm | |
| Colour | Orange | |
| Series | Series 7 | |
| Standards/Approvals | VDE | |
| Hazardous Area Certification | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 ITL Insulated Tools Ltd | ||
Product Type Enclosure Accessory | ||
Accessory Type Shroud | ||
Length 60mm | ||
For Use With Series 7 Cut-Outs | ||
Width 31mm | ||
Material Nylon Thermoplastic | ||
Height 25mm | ||
Colour Orange | ||
Series Series 7 | ||
Standards/Approvals VDE | ||
Hazardous Area Certification No | ||
- COO (Country of Origin):
- GB
The ITL Insulated Tools Ltd shroud series 7 non universal is designed for optimal electrical insulation, ensuring maximum safety and reliability during live line protection tasks while meeting high industry standards.
Manufactured from nylon thermoplastic for enhanced insulation strength
Meets IEC 60900, Category 'C', and ASTM F1505 standards
Tested to withstand 10,000 volts submerged in water for three minutes
Flame retardant, robust against extreme impact and abrasion
Lifetime warranty on both the tool and insulation
Operates effectively within a temperature range of -40ºF to +158ºF
관련된 링크들
- ITL Insulated Tools Ltd Series 7 Series Nylon Thermoplastic Shroud for Use with Series 7 Cut-Outs 25 mm x 60 mm x 31mm
- ITL Insulated Tools Ltd Series 7 Series Nylon Thermoplastic Shroud for Use with Series 7 Cut-Outs 25 mm x 52 mm x 30mm
- ITL Insulated Tools Ltd Series 5 Series Nylon Thermoplastic Shroud for Use with Series 5 Cut-Outs 25 mm x 50 mm x 34mm
- ITL Insulated Tools Ltd Slotted, 7-Piece
- EAO Blind Plug, For Use With Mounting Cut Outs
- ITL Insulated Tools Ltd Flat Standard Screwdriver Set, 7-Piece
- Rittal SZ Series Clamps: Sheet Steel, Plastic Connector Gland for Use with Connector Cut-Outs 50 mm x 50 mm x 50mm
- Rittal DK Series Polyvinyl Chloride Protector for Use with For Covering Sharp Edges of Cut-outs 11 mm x 10 m x 6mm
