Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button, Surface, 30 mm Cutout, 1 NO/2 NC, IP65
- RS 제품 번호:
- 840-3040
- 제조사 부품 번호:
- SSA-EB1PLXR-12ECQ8
- 제조업체:
- Banner
Subtotal (1 unit)*
₩432,432.00
재고있음
- 90 개 단위 배송 준비 완료
- 추가로 2026년 5월 18일 부터 6 개 단위 배송
- 추가로 2026년 6월 08일 부터 47 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩432,432.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 840-3040
- 제조사 부품 번호:
- SSA-EB1PLXR-12ECQ8
- 제조업체:
- Banner
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Banner | |
| Mount Type | Surface | |
| Product Type | Emergency Stop Push Button | |
| Cutout Diameter | 30mm | |
| Contact Configuration | 1 NO/2 NC | |
| Housing Material | Polycarbonate, Polyamide | |
| Push Button Actuation | Twist Release | |
| Illuminated | Yes | |
| Series | SSA-EB | |
| IP Rating | IP65 | |
| Terminal Type | M12 Connector | |
| Contact DC Voltage | 75V dc | |
| Contact AC Voltage | 60V ac | |
| Contact Current | 2A | |
| Head Style | Round | |
| Length | 119.8mm | |
| Hazardous Area Certification | NO | |
| Standards/Approvals | No | |
| Width | 33mm | |
| Push Button Material | Polyamide | |
| Safety Contacts | NC | |
| 모두 선택 | ||
|---|---|---|
브랜드 Banner | ||
Mount Type Surface | ||
Product Type Emergency Stop Push Button | ||
Cutout Diameter 30mm | ||
Contact Configuration 1 NO/2 NC | ||
Housing Material Polycarbonate, Polyamide | ||
Push Button Actuation Twist Release | ||
Illuminated Yes | ||
Series SSA-EB | ||
IP Rating IP65 | ||
Terminal Type M12 Connector | ||
Contact DC Voltage 75V dc | ||
Contact AC Voltage 60V ac | ||
Contact Current 2A | ||
Head Style Round | ||
Length 119.8mm | ||
Hazardous Area Certification NO | ||
Standards/Approvals No | ||
Width 33mm | ||
Push Button Material Polyamide | ||
Safety Contacts NC | ||
Banner Emergency Stop Push Button, 2A Current Rating, 40mm Button Head Diameter - SSA-EB Series - SSA-EB1PLXR-12ECQ8
Halt equipment in its tracks with this emergency stop push button from Banner. It cuts the power to a machine immediately when pressed, helping to prevent equipment damage and injuries. As it has an IP65 rating, this unit is fully protected against dust and low-pressure water jets, so it stays strong in tough industrial environments. Its bright red and yellow housing means it catches your eye in busy workspaces. Thanks to its latching mechanism, the push button stays down until you reset it, so faulty kit can't accidentally power up.
• Simple twist-release actuator for quick resets
• Contact block opens NC contacts automatically if the actuator disconnects to stop damage from assembly faults
• Large push button head diameter of 40mm makes it a cinch to press
• M12 quick-disconnect port for ease of use
Applications
• Industrial automation
• Packaging industry
• Heavy engineering
How can I tell that this emergency stop push button is activated?
The device's actuator lights up when it disconnects your equipment, so you can tell if it's active in a flash.
관련된 링크들
- Banner SSA-EB Series Twist Release Emergency Stop Push Button, Surface Mount, 1 NC, IP65
- Banner SSA-EB Series Pull/Twist to Release Illuminated Emergency Stop Push Button, Threaded, Threaded Mount, 30 mm
- Banner SSA-EB Series Twist Release Emergency Stop Push Button, Panel Mount, 30 mm Cutout, IP65, IP67, IP69
- Banner SSA-EB Series Twist Release Emergency Stop Push Button, Panel Mount, 30 mm Cutout, IP69, IP67, IP65
- Banner SSA-EB.. Series Twist Release Emergency Stop Push Button, Panel Mount, 30 mm Cutout, IP67, IP69, IP65
- Banner SSA-EB Series Twist Release Emergency Stop Push Button, Panel Mount, 30 mm Cutout, NC, IP65, IP69, IP67
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button, Flush, IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button, Flush, NC, IP65