제조사부품번호

Omron A22NE Series Twist Release Emergency Stop Push Button, Panel Mount, 22 mm Cutout, 1 NC, IP65

RS 제품 번호:: 215-7703
Distrelec 제품 번호:: 301-36-696
제조사 부품 번호:: A22NE-M-P002-N
제조업체:: Omron

Omron A22NE Series Twist Release Emergency Stop Push Button, Panel Mount, 22 mm Cutout, 1 NC, IP65

Subtotal (1 unit)*

₩87,920.00

2 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩87,920.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 215-7703
Distrelec 제품 번호:: 301-36-696
제조사 부품 번호:: A22NE-M-P002-N
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Mount Type	Panel Mount
	Product Type	Emergency Stop Push Button
	Cutout Diameter	22mm
	Contact Configuration	1 NC
	Push Button Actuation	Twist Release
	Illuminated	No
	Series	A22NE
	IP Rating	IP65
	Colour	Red
	Head Style	Round
	Standards/Approvals	No
	Hazardous Area Certification	No

	모두 선택
	브랜드 Omron
	Mount Type Panel Mount
	Product Type Emergency Stop Push Button
	Cutout Diameter 22mm
	Contact Configuration 1 NC
	Push Button Actuation Twist Release
	Illuminated No
	Series A22NE
	IP Rating IP65
	Colour Red
	Head Style Round
	Standards/Approvals No
	Hazardous Area Certification No

Omron A22NE Series Emergency Stop Push Button, IP65 Ingress Protection, Panel Mount Type - A22NE-M-P002-N

This emergency stop push button is a red, round control designed to provide a rapid mechanical disconnect for machinery and equipment. It is intended for panel installation and offers a robust sealed interface suitable for environments where protection from dust and water ingress is required. The device employs a manual twist-to-release action and presents a single normally closed contact to interrupt circuits when actuated.

Features and Benefits:

• IP65 rated housing prevents dust and water ingress
• Panel mount design enables secure dashboard integration
• 22mm cut-out compatibility simplifies retrofit installation
• Single NC contact ensures circuit interruption on activation
• Twist-release actuation delivers positive manual reset control

Applications

• Suitable for industrial control panels requiring operator E‑stop
• Ideal for machinery safety stations in wet areas
• Used with automated conveyors needing accessible shut-off
• Can be used for retrofit safety upgrades on control cabinets

What mounting preparation does it require?

It fits a 22mm panel hole and secures from the front for straightforward installation into standard control panels.

How is the device reset after activation?

The actuator must be rotated to release it, mechanically restoring the contact to its normal state.

Is the unit illuminated for visibility in low light?

No, the design does not include any illumination

visibility relies on colour and placement.

Can it be used in hazardous classified zones?

The product has no hazardous area certification and should not be specified for classified locations.