Banner SSA-EB1 Series Pull to Release Illuminated Emergency Stop Push Button, Panel Mount, 30 mm Cutout, DPST, IP65
- RS 제품 번호:
- 295-131
- 제조사 부품 번호:
- SSA-EB1P-02
- 제조업체:
- Banner
Subtotal (1 unit)*
₩91,546.65
일시적 품절
- 2026년 6월 08일 부터 7 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩91,546.65 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 295-131
- 제조사 부품 번호:
- SSA-EB1P-02
- 제조업체:
- Banner
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Banner | |
| Mount Type | Panel Mount | |
| Product Type | Emergency Stop Push Button | |
| Cutout Diameter | 30mm | |
| Contact Configuration | DPST | |
| Housing Material | Aluminium, Polyamide | |
| Push Button Actuation | Pull to Release | |
| Series | SSA-EB1 | |
| Illuminated | Yes | |
| IP Rating | IP65 | |
| Terminal Type | M3 Screw Terminal | |
| Head Style | Mushroom Shaped | |
| Contact Current | 5A | |
| Switch Configuration | Latching | |
| Hazardous Area Certification | NO | |
| Standards/Approvals | ISO 13850, EN 60947-5-1, CSA C22.2 No.14, NFPA79, EN/IEC 60497-5-1, EN 60947-5-5, IEC 60204-1, UL 508, EN/IEC 60947-5-5, ANSI B11.19, EN 60947-1 | |
| Width | 72mm | |
| Safety Contacts | NC | |
| 모두 선택 | ||
|---|---|---|
브랜드 Banner | ||
Mount Type Panel Mount | ||
Product Type Emergency Stop Push Button | ||
Cutout Diameter 30mm | ||
Contact Configuration DPST | ||
Housing Material Aluminium, Polyamide | ||
Push Button Actuation Pull to Release | ||
Series SSA-EB1 | ||
Illuminated Yes | ||
IP Rating IP65 | ||
Terminal Type M3 Screw Terminal | ||
Head Style Mushroom Shaped | ||
Contact Current 5A | ||
Switch Configuration Latching | ||
Hazardous Area Certification NO | ||
Standards/Approvals ISO 13850, EN 60947-5-1, CSA C22.2 No.14, NFPA79, EN/IEC 60497-5-1, EN 60947-5-5, IEC 60204-1, UL 508, EN/IEC 60947-5-5, ANSI B11.19, EN 60947-1 | ||
Width 72mm | ||
Safety Contacts NC | ||
- COO (Country of Origin):
- JP
The Banner Electro Mechanical Push Button features push to stop switches. It comes with twist to release or pull to release operation. It comes with a latching design which complies with ISO 13850. When the button is armed, the switch's safety contacts (normally closed/NC) are closed and its monitoring contacts (normally open/NO), if present, are open. When the button is pushed, the switch's safety contacts open, and the monitoring contacts close. The contacts remain in this condition until they are manual rearmed.
Compliant with ANSI B11.19 and NFPA 79
Panel mount though 30 mm mounting hole
관련된 링크들
- Banner SSA-EB1 Series Pull to Release Emergency Stop Push Button, Panel Mount, 40 mm Cutout, DPST, IP65
- Banner SSA-EB Series Pull/Twist to Release Emergency Stop Push Button, Flush, 14.5 mm Cutout, DPST
- Banner SSA-EB1 Series Twist Release Illuminated Emergency Stop Push Button, Flush, DPST, IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button, Threaded, 30 mm Cutout, DPST, IP65
- Banner SSA-EB Series Twist Release Emergency Stop Push Button, Panel Mount, 22 mm Cutout, DPST, IP65, IP66, IP54, IP67,
- Banner SSA-EB Series Illuminated Emergency Stop Push Button, Panel Mount, 30 mm Cutout, DPST, IP20, IP65
- Banner SSA-EB Series Pull/Twist to Release Illuminated Emergency Stop Push Button, Threaded, Threaded Mount, 30 mm
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button, Flush, IP65