제조사부품번호

WAGO 788 Series Interface Relay, DIN Rail Mount, 24V ac Coil, DPDT, 8A Load

RS 제품 번호:: 180-3040
제조사 부품 번호:: 788-512
제조업체:: WAGO

WAGO 788 Series Interface Relay, DIN Rail Mount, 24V ac Coil, DPDT, 8A Load

Subtotal (1 unit)*

₩19,476.80

재고있음

60 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩19,476.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 180-3040
제조사 부품 번호:: 788-512
제조업체:: WAGO

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	WAGO
	Coil Voltage	24V ac
	Contact Configuration	DPDT
	Mounting Type	DIN Rail
	Series	788
	Load Current Rating	8A
	Load Voltage Rating	250V ac
	Maximum Input Voltage	24V ac
	Terminal Type	Cage Clamp
	Switching Voltage	250V ac
	Depth	86mm
	Height	54mm
	Length	15mm
	Contact Material	Silver Alloy
	Input Current	34mA
	Minimum Operating Temperature	-25°C
	Special Features	IP20 Degree of protection, LED Indication
	Operating Temperature Range	-25 → +50°C
	Life	1 x 10^3 (Electrical) cycles, 30 x 10^6 (Mechanical) cycles
	Standards Met	DNV GL TAA00001D1, EN 61010-2-201, EN 61373, EN 61810-1, GL, NK TA17255M, PRS TE/1989/880590/13, UL, UL E175199 Sec.6
	Dimensions	15 x 54 x 86mm
	Input Voltage Range	Maximum 24V ac
	Maximum Operating Temperature	+50°C

	모두 선택
	브랜드 WAGO
	Coil Voltage 24V ac
	Contact Configuration DPDT
	Mounting Type DIN Rail
	Series 788
	Load Current Rating 8A
	Load Voltage Rating 250V ac
	Maximum Input Voltage 24V ac
	Terminal Type Cage Clamp
	Switching Voltage 250V ac
	Depth 86mm
	Height 54mm
	Length 15mm
	Contact Material Silver Alloy
	Input Current 34mA
	Minimum Operating Temperature -25°C
	Special Features IP20 Degree of protection, LED Indication
	Operating Temperature Range -25 → +50°C
	Life 1 x 10^3 (Electrical) cycles, 30 x 10^6 (Mechanical) cycles
	Standards Met DNV GL TAA00001D1, EN 61010-2-201, EN 61373, EN 61810-1, GL, NK TA17255M, PRS TE/1989/880590/13, UL, UL E175199 Sec.6
	Dimensions 15 x 54 x 86mm
	Input Voltage Range Maximum 24V ac
	Maximum Operating Temperature +50°C

Datasheet

COO (Country of Origin):: DE

Relay module, Nominal input voltage: 24 VAC, 2 changeover contacts, Limiting continuous current: 8 A, Red status indicator, Module width: 15 mm

Reinforced insulation between coil and contacts
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.

WAGO 788 Series Interface Relay, DIN Rail Mount, 24V ac Coil, DPDT, 8A Load

관련된 링크들